Archived posting to the Leica Users Group, 2008/11/24
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Hello Joseph, I don't have the 21mm SA lens but if I did this is what I would do. First make sure the 21mm SA lens will not interfere with the M8. In the M8 the 21mm Elmarit brings up the 28/90 mm frame lines. I would order one of these LTM to M adapters from John Milich which are machined woth slots to be coded. Leica has released two codes for the 21mm, Asph and non Asph. I would try and find out which of these two lenses more closely matches the vignetting properties of the 21mm SA and code my new adapter that way. The 21mm SA uses either a 48mm filter or a series VII filter. B+W makes a 48mm UV/IR filter and Leica has announced they will have a Ser VII. Most likely the M8 will do a fair job of correcting the vignetting and cyan creep but if it's close what little correction is needed should be able to be corrected by PS. You will need to use an external 28mm viewfinder for proper framing with the M8. Or you can use the full view of the M8 finder which is slightly wider then when using a 24mm lens. If anyone has done this or uses the 21mm SA on the M8 please let us know how it works out. Henning? Len On Nov 24, 2008, at 3:44 AM, Joseph Low wrote: > What about the SA 21/3.4 on the M8 ? > > Joseph > > -----Original Message----- > From: lug-bounces+joelct=singnet.com.sg@leica-users.org > [mailto:lug-bounces+joelct=singnet.com.sg@leica-users.org] On > Behalf Of > Leonard Taupier > Sent: Monday, 24 November, 2008 1:40 PM > To: Leica Users Group > Subject: Re: [Leica] M8 question #2: Barcoding lenses > > Alan, > > I use many Leica LTM lenses on my M8 going back to those made in the > 30's. However none are wider then 35mm so I don't worry about coding. > When used on the M8 I do use a UV/IR filter. Most of the very old > lenses use an A36 push on filter. I have a Leitz push on A36 adapter > that uses the special Summitar filter. I made a special Summitar > filter that uses the filter glass from a 39mm UV/IR filter mounted in > an old Summitar filter frame. Other then that special case there are > UV/IR filters available from B+W or Heliopan for all sizes. I only > have two lenses that are not made by Leica, a 35mm Jupiter 12 and a > Konica 50mm. They both take a 40.5 mm filter which I have a Heliopan > UV/IR for. The 50mm f1.5 Summarit and Xenon use a 41mm filter. For > those two I use a 41-> 46 step up ring and a 46mm filter. > > Len > > > On Nov 23, 2008, at 10:59 PM, Alan Magayne-Roshak wrote: > >>> Subject: Re: [Leica] M8 question #2: Barcoding lenses >> ___________________________________________________ >> This discussion makes me wonder: are any of you M8 owners >> using older, non-Leitz lenses on it? If I were ever able to afford >> an M8, I would need to use my LTM Nikkor and Canon lenses >> as well as my 1960's era Leitz glass on it. I couldn't get a body >> AND new lenses. >> >> Alan >> >> Alan Magayne-Roshak, Senior Photographer >> UPAA POY 1978 >> University Information Technology Services >> University of Wisconsin-Milwaukee >> http://gallery.leica-users.org/v/Alan+Magayne-Roshak/ >> >> >> >> >> >> >> >> _______________________________________________ >> Leica Users Group. >> See http://leica-users.org/mailman/listinfo/lug for more information > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information > > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information