Archived posting to the Leica Users Group, 2010/09/19
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]physical damage, power cycling it during write, bad sectors, etc, etc... On 20 September 2010 12:54, Oliver Bryk <oliverbryk at comcast.net> wrote: > I would like to understand what might have caused one of my SD cards - a > SanDisk 4GB SDHC card - to malfunction. I have used it without problems in > my M8 for several months and formatted it in the camera after every 50 or > so > exposures. When I attempted to format it today, the formatting process ran > much longer than I was accustomed to, and would not quit until I removed > the > battery from the camera. I put the card and the battery back and tried > again > with the same result. I put in a fully charged battery; as soon as I turned > the camera on the display read "SD card full". When I tried to format it > the > process wouldn't quit. I took the battery and the card out, put both back, > and turned on the camera; the message on the display read "no SD card". In > each of the cases described above the battery status/remaining exposures > display read Zero. > > I tried a different card (SanDisk 8GB SDHC) which formatted quickly (there > was nothing on it) and gave the correct number of remaining exposures. > > The 4GB card has apparently failed. What might have caused it to fail? > > Oliver > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information >