Archived posting to the Leica Users Group, 2002/08/11
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]David Rodgers <davrod@worldnet.att.net> wrote: > > Thanks for posting the Kodak mono camera link. Like you, I find it > interesting. > > I always thought having RGB sensors was a waste for shooting b/w. Three > sensors when one would do, and all. But I've obtained some interesting > results tweaking separate RGB channels for a final greyscale. It's like > adding filtration after the fact. I wonder how a camera designed for > monochrome will work. Will it require filters or can filtration be dialed > in? I use filters a lot in b/w. This camera is interesting because, to the best of my knowledge, it is the only digital camera generally available that will do greyscale/B&W properly. Non-digital types may not be aware how much real data is lost in the process of capturing with a conventional digital SLR and converting the results to greyscale/B&W. Indeed, contrary to David Rodgers' statement above, digital still cameras do *not* have more than one sensor and capture in RGB using a special filter array to 'spread' the R G & B information across a single sensor. Using the Bayer pattern algorithm, the information is interpolated to create 3 separate channels. This results in a loss of real resolution. Although the quality of this process can be very good, it is not perfect and areas of small detail (e.g. twigs and branches on a tree) can end up suffering from severe colour bleed and fringing (often resulting in ugly halos). When you convert the resulting file to greyscale/B&W you are simply converting the interpolated data - along with all the fringing, bleed, etc. The beauty of the Kodak 760M is that, by only outputting to B&W it does away with the Bayer interpolation process and, thus, allows you to capture with the full resolution of the 6MP chip. Without the need to interpolate the data into 3 channels (via the Bayer method), you will get a far superior result free from the problems noted above. Ian Watts - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html