Archived posting to the Leica Users Group, 2009/01/19
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]>Even when using an incident meter I find there is often scope for >over-exposing to move the histogram to the right. > >And to reply to Mark, it depends on how you define over-exposure. I define >it as giving more exposure than the meter indicates. If you define it as >blowing out the hightlights then you are correct, but I don't think that's >what most people mean by over-exposing. > >Bob > 'Over-eposing' means exposing more than should be exposed, ie, blowing highlights. Not good, especially since the highlights are more important than the shadows in the majority of photos as they attract the eyes. A light meter does not indicate the correct exposure, it just lets you know the light values and corresponding exposure if the scene were of an averaged 18% grey. You then apply your experience to modify that to determine the correct exposure. With my Canons I avoid blowing highlights by setting exposure to -1/3 for average shots; with the M8 I set it to -2/3 for average shots. If there are any large dark, very light or other anomalous areas, I adjust as required. Critical stuff gets a trial shot, histogram analysis and manual exposure. Over-exposing means not exposing correctly, as does underexposing. If you clip some bits in the highlights, you better be sure they're the sun, some other light source or specular reflections, and even then the adjacent transition areas are susceptible to non-correctable colour shifts. It's the nature of clipped digital information. Distortion. And that's what you avoid by staying away from clipped highlights. -- * Henning J. Wulff /|\ Wulff Photography & Design /###\ mailto:henningw@archiphoto.com |[ ]| http://www.archiphoto.com