Archived posting to the Leica Users Group, 2006/02/13

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]
Subject: [Leica] What causes frame spacing to change?
From: abridge at gmail.com (Adam Bridge)
Date: Mon Feb 13 18:28:49 2006
References: <4cfa589b0602130838n26043d11h6c51df46fdcea517@mail.gmail.com> <10B9FA13-7D59-42CE-AB69-EB75C278A475@shaw.ca>
 
Oh drat. I hope not. But if it does it again it's gonna get sent off.

Thanks for the info John.

Adam

On 2/13/06, John Collier <jbcollier@shaw.ca> wrote:
> The stop arm and stop disc retaining nut may be loose/loosening.
> Internal I am afraid.
>
> John Collier
>
> On 13-Feb-06, at 9:38 AM, Adam Bridge wrote:
>
> > I had the M6ttl out for a walk yesterday and ran through a roll of Tri
> > X. At the end of the roll the spacing between adjacent frames was less
> > than half what it normally should be - as if the film hadn't pulled
> > through correctly. I have a motor M on this camera with new batteries.
> > It wasn't the last frame and subsequent frames were just fine.
> >
> > Do I have a problem? I've never seen this before.
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>
Replies: Reply from r.s.taylor at comcast.net (Richard S. Taylor) ([Leica] What causes frame spacing to change?)
 In reply to: Message from abridge at gmail.com (Adam Bridge) ([Leica] What causes frame spacing to change?)
Message from jbcollier at shaw.ca (John Collier) ([Leica] What causes frame spacing to change?)