Archived posting to the Leica Users Group, 2001/10/13

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] Adjusting Rangefinders - technical advice
From: D Khong <dkhong@pacific.net.sg>
Date: Sat, 13 Oct 2001 19:41:49 +0800
References: <4.3.0.20011013135554.00a71a20@pop.asiaonline.net>

How does one remove this little plug?

Dan K.



At 02:30 AM 10/13/01 -0400, dante@umich.edu wrote:
>The RF adjustment (horizontal) is accessible under the little plug on the
>top.  The vertical requires the top cover to be removed.
>
>on 10/13/01 2:03 AM, Howard Cummer at cummer@asiaonline.net wrote:
>
>> Hello Luggers
>> I have the adjustment of my Bessa R rangefinder down to a 5 minute
>> operation so I don't get upset when it drifts out of alignment - I just fix
>> it. I have had my Hexar RF into the repair department of Konica three times
>> and I have watched the long suffering Mr. Leung adjust the finder on the RF
>> closely enough that I think I can do it myself. But I have a question -
>> what type of solvent should I use to soften the adhesive so that I can lift
>> the covering of the front of the camera on the right side of the lens in
>> order to get at the screw which holds down the front side of the top cover.
>> Also what glue do I need to glue down the covering after the adjustment is
>> made. Thanks for your input(s)
>> Howard Cummer.
>> 
>> --
>> To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html
>
>--
>To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html
>





  
- --
To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html

In reply to: Message from Howard Cummer <cummer@asiaonline.net> ([Leica] Adjusting Rangefinders - technical advice)