Archived posting to the Leica Users Group, 2001/10/12
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]The RF adjustment (horizontal) is accessible under the little plug on the top. The vertical requires the top cover to be removed. on 10/13/01 2:03 AM, Howard Cummer at cummer@asiaonline.net wrote: > Hello Luggers > I have the adjustment of my Bessa R rangefinder down to a 5 minute > operation so I don't get upset when it drifts out of alignment - I just fix > it. I have had my Hexar RF into the repair department of Konica three times > and I have watched the long suffering Mr. Leung adjust the finder on the RF > closely enough that I think I can do it myself. But I have a question - > what type of solvent should I use to soften the adhesive so that I can lift > the covering of the front of the camera on the right side of the lens in > order to get at the screw which holds down the front side of the top cover. > Also what glue do I need to glue down the covering after the adjustment is > made. Thanks for your input(s) > Howard Cummer. > > -- > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html