[Leica] Problems with P2002

[Matthias de Biasi <matthias62@yahoo.de>]

Hello Christoph,

first of all thank you for your mail.

Let me try to describe the problem again: If you look
at the projector from the front, it has two grooves in
the slot where the tray goes in. On the bottom of the
right groove there is the little gear that moves the
tray forward. On the left wall of the left groove
there is a little lever that has the function of a
stop for the tray. So, when you insert the tray from
behind it can be moved forward until it touches this
lever. Every time you push the forward button on your
remote control this little lever moves inside the wall
so the tray can be moved forward to the position of
the next slide. In the case of my projector the lever
is not being retracted completely.

So, in contrast to what I have written in my last
mail, the problem is not that the tray hangs because
of the gear. But, the tray cannot be moved further by
the gear because it is stuck at the lever.

Actually, it is not very much that is missing so the
tray would pass the lever. As I found out, the problem
can be solved by simply taking away the sharp edge
from the tray with a knife.

Maybe Leica-trays would pass, I don't know. And maybe
the movement of the lever is something that can be
adjusted, I don't know either.

Any more comments?

Thanks
Matthias

__________________________________________________________________
Do You Yahoo!?
Gesendet von Yahoo! Mail - http://mail.yahoo.de
Yahoo! Mail auf Ihrem Handy? - http://mobil.yahoo.de