Archived posting to the Leica Users Group, 1999/04/16

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Keystoned images
From: "4Season" <4season@boulder.net>
Date: Fri, 16 Apr 1999 23:17:47 -0600

I recently photographed a number of framed  paintings on behalf of a
co-worker, a budding but gifted artist, who wished to have several sets of
slides to leave with gallery owners. The budget? Minimal, definitely not
enough to cover medium or large-format expenses, particularly when the need
to scan images was considered.

Lacking a 35mm SLR, I arrived with tripod, my M6, 35 and 90 Summicrons, and
a 50 Elmar. Lights and reflectors? I don't own any, and figured I didn't
want to be experimenting on the spot. I had anticipated the possibility of
an open shade situation, and brought Ektachrome 100SW, another conservative
choice that I know well.

The lighting, I could see, was going to be tricky, as there was a good deal
of indirect sunlight from a window just off to the righthand side of the
paintings. I had been very careful to arrange for a time when the sun wasn't
shining directly through the window, but it nevertheless made for some
rather uneven illumination. How to expose? Bracketing would've been handy,
but due to the number of useable images needed, and the tight budget, that
wasn't real practical. Finally opting for simplicity, I took a Zone VI
reading from the palm of my hand, placed near the center of the painting,
and did not vary the settings, though I did recheck exposure periodically.
An incident-type meter would've been a bit handier, but using this trick, my
Pentax spotmeter worked fine.

A good deal of lens-swapping and repositioning of the camera was involved,
and my current feeling of the Arca-Swiss B1 + Leica M combo is that it's a
poor match, as the Arca is clearly optimized for much heavier loads, and the
M's baseplate flexes a lot under the heavy drag, even with the Really Right
Stuff QR plate in use. But again, it's all I had, and it's kind of rare that
I use a tripod with small-format cameras anyhow.

The results? Not bad at all! Exposure and color rendition throughout was
almost exactly as planned, and I think my co-worker will make a fine
impression with those gallery owners. An unwelcome surprise was discovering
that most photos show keystoning in exactly the same way: Narrower on the
left, wider on the right. Evidently, my camera's finder has some heretofore
unnoticed distortions, at least in the 1.5-2.5 meter range-anyone else seen
this, and is it just an inherent thing at these working distances, or what?

Aside from these optical distortions in the finder, and an approximately 1/3
stop error in the light meter, my late model M6 (maybe three years since it
left the factory?) hasn't had any problems at all--no scratched negatives,
no hassles with the rangefinder alignment, no nothing.

Jeff