Archived posting to the Leica Users Group, 2018/02/08
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Thank you Don, I forget to say I?m using a Sure Color Epson P 600, tomorrow I?ll do new trials Cheers Lluis > El 8 febr 2018, a les 18:29, Don Dory via LUG <lug at leica-users.org> va > escriure: > > Lluis, > I have had similar difficulties with saturation on paper vs screen. What I > found is that the transilluminated images were always less saturated than > what was printed on reflective media. I eventually worked out how much to > lighten the images for printing. I wasn't using an outside service but was > printing on an Epson 7800. I am not sure this will help as you have been > printing for long enough to do the translation but sometimes algorithms > change and we have to adapt to the computers, sigh. > > On Thu, Feb 8, 2018 at 11:49 AM, Lluis Ripoll via LUG <lug at > leica-users.org> > wrote: > >> Hello all, >> >> I?m preparing a family Blurb book in color, the pictures are made with the >> M8 and processed with Capture One updated at Vs10, I export the images on >> sRGB mode, my actual computer is a iMac 27? Retina, however I have >> calibrated the monitor user Spyder Pro4 from DATACOLOR, the result of the >> calibration is that my profile respond to 100% to sRGB. >> >> I?ve realized I had a problem when I have exported my images to the Blurb >> book using Booksmart 2, I saw that the images look much more saturated >> than >> my monitor view on Capture or Bridge, I have tried using Bookwright, >> exactly the same problem, I have send an e-mail to Blurb, they have sent >> me >> the Blurb ICC Profile, but the problem continues. >> >> I have to say that for the printing test I have used cheap glossy paper, >> not my usual quality (Canson Infinity Platine Fiber Rag), I think that >> this >> can not make a big difference, but maybe I shall to try it?. >> >> Finally I?ve tried to print the image, using different profiles (as sRGB, >> Blurb ICC, the native one?), testing both modes, Color Management by Color >> Synch and Color Management by the printer, and the colors of the print >> differ very much than the ones I see on the Monitor. The last test I?ve >> did >> was using Lightroom to print the picture it was a little better but not >> the >> quality I could expect. >> >> If my monitor is well calibrated, the image on my monitor is perfect?.. >> why I have these problems? I can not understand?., with my old Mac I had >> any problem and with this I?ve found a lot?. >> >> I will appreciate very much your help, thank you in advance >> >> Best! >> LLuis >> >> >> _______________________________________________ >> Leica Users Group. >> See http://leica-users.org/mailman/listinfo/lug for more information > > > > > -- > Don > don.dory at gmail.com > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information