Archived posting to the Leica Users Group, 2014/04/06
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Apply to both JPEG and RAW john ________________________________________ Do these changes (below 35mm) apply only to jpg out of the camera or do they also apply to DNG (RAW) files? Herbert Kanner kanner at acm.org 650-326-8204 On Apr 5, 2014, at 4:24 PM, Frank Filippone <red735i at verizon.net> wrote: > Simple... the camera does no changes to the image from 35mm and up. 28 and > below, and the camera applies some image corrections, depending on the > lens. > > Otherwise, the only difference is that without the coding, the camera can > not place any info in the EXIF file about the lens being used. > > All of this is irrelevant if you wish to tell the camera which lens is > mounted (manual lens input through the LCD and Menu) .. and then it all > works as if the lens were coded.... > > Look at the back of your lens... if there are 5 or 6 screw heads on the > lens > flange, it probably can be coded by changing out the flange. ($20 or so > from EBay) > You may require re-collimation if the lens does not focus correctly... DAG > charges about $125 for collimation..... Leica, if you decide to go that > route, charges $300 or more to do the entire job,..... > > > Frank Filippone > Red735i at verizon.net > > Subject: [Leica] Coded or non coded lenses, that is the question > > As many good fellows suggested the big M body will be the way to go. > Now, how do non coded lenses behave in such a body ? > Will, on the other side, non coded lenses be able to get coded by someone, > who does that? > Thanks and regards > Pablo >