Archived posting to the Leica Users Group, 2005/12/24
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Hi Javier, Merry wjhatecveer you're celebrating, I think David Young has all the Leica manuals (including the CL) on his site, I could have sent you a scan of mine but, unfortunately it's in German. Take a look at http://www.horizon.bc.ca/~dnr/_private/clbook/cl-index.htm I think you may find what you need. Hope this helps Douglas Javier Perez wrote: > Hi Everyone > > As you've probably guessed I'vw had a run in with a CL on ebay. Paid > too much thinking it was "clean" and it wasn't. Still, on camaritarian > grounds it seems right to get the thing running again. I've already > managed to un jam the shutter and resilver the prism (my way) but have > a few questions about the meter. > > 1) Without battery, at which speed and ASA does the meter needle > reside in the center notch? > I think it's 1/60 at 100 but I'm not sure. > > 2) With a 1.35 battery at which combination of speed and ASA does the > needle reside in the > center notch. I think it's B or 1/2 at 100 but again I'm not sure > > 3) and finally wht ios the nominal impedence for the meter proper. > Mine had an open circuit and I had to bridge across ac ouple of > windings. I get 3.9K but I'm not sure what it should be. > > Anyway, it's a fun little camera to work on but I can see how the > linkages on the meter might get screwed up. Because the meter doesn't > have the mechanical travel range, it bottoms out and a red flag > appears. If you are overpowering or don't see the flag you can wind up > wrecking the whole meter linkage. I had thought this narrow range > metering scheme had died with the bullseye but I guess I was wrong. > Still, it's a lovely little camera. I'd love to do an SPD/LED > conversion on it! > > Anyway, Any info is very much appreciated. > Merry Xmas to all! > Javier > > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information >