Archived posting to the Leica Users Group, 2005/11/11
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Hello Robert. I want to welcome you to this great group of people. I hope to see many posts from you. peace David On Nov 11, 2005, at 3:44 PM, GUTKNECHT, ROBERT F - SSD wrote: > > I am a new member - this is my first post. I was just given what I > think is a film trimming template for shaping the ends of 35 mm. film > rolls. It is a flat, two piece, hinged device with a brushed steel > finish. When the two pieces are closed on one another, two sprocket > studs on one surface protrude through two corresponding holes in the > other surface. When opened, it has engraving near the top which says > "coated side". Below this text there is a slot milled through the metal > on a 45 degree angle. It has a lanyard hole near the tapered tip. The > top of the front surface is engraved "Leitz...Wetzlar...Germany". Can > anyone explain exactly how it is used and where I can get an original > or > reprinted instruction sheet for it ? Thanks very much in advance. > > > ************************************ > This e-mail and any files transmitted with it are proprietary and > intended solely for the use of the individual or entity to whom they > are addressed. If you have received this e-mail in error please notify > the sender. Please note that any views or opinions presented in this > e-mail are solely those of the author and do not necessarily represent > those of ITT Industries, Inc. The recipient should check this e-mail > and any attachments for the presence of viruses. ITT Industries > accepts no liability for any damage caused by any virus transmitted by > this e-mail. > ************************************ > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information