Archived posting to the Leica Users Group, 2005/11/11

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Template ?
From: douglas.sharp at gmx.de (Douglas Sharp)
Date: Fri Nov 11 12:06:13 2005
References: <606732A3F6993F4FB3A69EA6D09B45810D1247@ssdrocxch1.SSD.de.ittind.com> <ceb1a5650511111150o7069bfc2g356741cae5c2e8a2@mail.gmail.com>

http://www.ozdoba.net/leica/schraub_laden_d.html
I hope the name Gutknecht means that you can read German.
Douglas

Mark Langer wrote:

>This sounds like the ABLON template. Just put the film on one side, with the
>sprocket holes engaging the pins. Close the device, and trim off the film
>that protrudes. This is used to trim a longer leader on the film when using
>a screwmount Leica.
>
>Mark
>
>On 11/11/05, GUTKNECHT, ROBERT F - SSD <ROBERT.GUTKNECHT@itt.com> wrote:
>  
>
>>I am a new member - this is my first post. I was just given what I
>>think is a film trimming template for shaping the ends of 35 mm. film
>>rolls. It is a flat, two piece, hinged device with a brushed steel
>>finish. When the two pieces are closed on one another, two sprocket
>>studs on one surface protrude through two corresponding holes in the
>>other surface. When opened, it has engraving near the top which says
>>"coated side". Below this text there is a slot milled through the metal
>>on a 45 degree angle. It has a lanyard hole near the tapered tip. The
>>top of the front surface is engraved "Leitz...Wetzlar...Germany". Can
>>anyone explain exactly how it is used and where I can get an original or
>>reprinted instruction sheet for it ? Thanks very much in advance.
>>
>>
>>************************************
>>This e-mail and any files transmitted with it are proprietary and intended
>>solely for the use of the individual or entity to whom they are addressed.
>>If you have received this e-mail in error please notify the sender. Please
>>note that any views or opinions presented in this e-mail are solely those 
>>of
>>the author and do not necessarily represent those of ITT Industries, Inc.
>>The recipient should check this e-mail and any attachments for the presence
>>of viruses. ITT Industries accepts no liability for any damage caused by 
>>any
>>virus transmitted by this e-mail.
>>************************************
>>
>>_______________________________________________
>>Leica Users Group.
>>See http://leica-users.org/mailman/listinfo/lug for more information
>>
>>    
>>
>
>_______________________________________________
>Leica Users Group.
>See http://leica-users.org/mailman/listinfo/lug for more information
>
>
>  
>

In reply to: Message from ROBERT.GUTKNECHT at itt.com (GUTKNECHT, ROBERT F - SSD) ([Leica] Template ?)
Message from langeratcarleton at gmail.com (Mark Langer) ([Leica] Template ?)