Archived posting to the Leica Users Group, 2002/05/03
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Hi Roy, Do you mean: it doesn't matter what you set on the flash unit when using TTL mode? Frank W. - ----- Original Message ----- From: "Roy Zartarian" <rzartarian@snet.net> To: <leica-users@mejac.palo-alto.ca.us> Sent: Saturday, May 04, 2002 5:04 AM Subject: Re: [Leica] TTL Flash with R6.2 > With the R6 and 40MZ3 and SCA 351, I change the ISO on the flash to a higher > value than that of the film (320 on the flash when he film is 100) and the > aperture setting on the flash to a larger one than the actual lens opening > (2.8 on the flash when the lens is set to 5.6). This approach works for me. > > Roy > > > On Friday 03 May 2002 01:25 pm, Frank W. wrote: > > When I use R6.2 + Metz 54 MZ3 + SCA 351 for TTL flash, I found that the > > following in doubt: > > > > 1. f-value and ISO can be alerted on the flash unit (I know that these > > can't be set with R8 and SCA 3502). What happen if the f-value and ISO > > setting on the flash unit different from that in the camera? > > 2. According to Metz's manual, TTL fill-in flash is only available on > > R8+3502. What can I do in a strong back-lighted environment with R6.2+351? > -- > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html