Archived posting to the Leica Users Group, 2002/03/24
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]At 12:08 PM 3/24/02 -0500, you wrote: >I asked for, and eventually received a sample print made with the Cone >Piezography process. My complaint is that when I made the request, my >understanding was that the process worked on relatively inexpensive Epson >3000 printers. But the sample sent to me was printed on an Epson 7000 >printer, which costs something like $4000 (US). > >For me the whole point of the process has been lost. > >Dan C. > Dan - I've never used anything but the 3000's. I have two of them and they have both worked perfectly since I got them. You do need to use the Piezography software with the 3000's because it changes the rather large dot pattern of the 3000 to a dotless pattern. The large ink cartridges make it possible to use the quad-black inks, either Piezo or MIS, without the Continuous Ink System. Jon Cone says on his site that the 3000 is the perfect printer for Piezography. Tina Tina Manley, ASMP http://www.tinamanley.com images available from http://www.pdiphotos.com - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html