Archived posting to the Leica Users Group, 2001/10/06
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]I made something similar from a sheet of aluminum. I just cut/filed the curve and bent the bottom with a vise and hammer to form a channel. I then use a knife to make the cut. It is not strictly necessary but it works and is convenient. Mike D - ----- Original Message ----- From: "Mārtiņš Zelmenis" <martin@lrpv.lv> To: <leica-users@mejac.palo-alto.ca.us> Sent: Friday, October 05, 2001 4:33 AM Subject: Re: [Leica] Re:counting sprocket holes? (Cutting film) > Friends, > > I keep wondering about the discussion in cutting film leader for use in LTM > cameras. As far as I know before WWII Leica itself manufactured - and > marketed - a special device for trimming the film evenly so it doesn't > engage itself against the pressure plate. Isn't any of them around anymore?? > > Martin > > -- > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html > - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html