Archived posting to the Leica Users Group, 1999/02/18
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Fuji film curls when dried with heat. It is best to use little or no heat with Fuji (at least E6 - Velvia being a real problem). The PRO labs that dry all E6 with heat, have to let Fuji hang for an hour to cool, and uncurl somewhat, before mounting. Jobo recommends no heat with Fuji. If you have curled film, Jobo recommends hanging the film, in an enclosed area (like a film drier) with a pan of "very" hot water sitting on the bottom, under the film. The high humidity will uncurl the film. Jim At 04:42 PM 2/18/99 -0400, you wrote: >Mark and Harrison: > >Kodak and others suggest for slide films at least, the quicker you dry >them, the more permanant the dyes will be. I myself am a little impatient >and like my film dried quickly. I suddenly realized last week that I had >a large drying cabinet in my house outside of my darkroom. I have a dry >sauna which fits about six people. I hung a line in it and when my slide >film is developing, I turn it on so it heats to just under 140 degrees. >When the film is done I hang it in the sauna. It takes about ten minutes >and is within the 105-140 temperature range for heated drying suggested by >Kodak. This temperature range is the same for the Tmax films as well. > >If in doubt, you can always check the recommendations of the manufacture, >rather than rely on outdated resources. The internet now makes it very >easy to get this info. Kodak has such good support in this respect and >their published data guides, that I prefer using Kodak film to Fuji because >of the support they offer. Fuji's web site is just superficial sales hype >with very little tecnical data. Below is a link to the Kodak info on >machine drying the Tmax film. > >http://www.kodak.com/global/en/professional/support/techPubs/f32/f32e.shtml# >006 > > >Regards, > >Robert > >At 11:55 AM 2/18/99 -0800, you wrote: >>Harrison McClary wrote: >>> >>snip I dry my film in a Senrac film >>> dryer...the only problems I have ever encountered with this is a tendency >>> for the Tri-x or Neopan to stick to the reels if allowed to get too cool >>> before removing from the reel. For some reason this does not happen with >>> TMAX films. >>> >>> Good luck. >>> >>> Harrison McClary >>Drying Negs with heat is way high on my absolute NoNo list. This is a >>result of 30 years of reading coubntless articles in Pop and Mod >>Photography, Cora Wright Kennedy, Bill Pierce, etc. I have never >>compared the results with a microscope It has been bled into my genetic >>code that doing such a thing will kiss your grain goodbye. Maybe I'm >>wrong... >>But your film sticking to your reels should be a sign that there is an >>extreme thing happening. You don't want extreme things to be happening >>to your film. Especially in terms of extremes of temperature. >>Mark Rabiner >> >> >> >> >