[Leica] [Leica} Tina's Drobos... Update: All loaded.

[Frank Filippone]

For those interested in techie nonsense. what Richard is saying is that the CONTROLLER, which is a chip in the NAS, was bad.  This means the data was 
written to the HDDs in a nonsense way... And there  is no way to fix that kind of error.  You lose everything you wrote.

While this is a real risk, it is pretty small.... You usually run the NAS ( or other electronic device) for several days, eliminating this kind of 
infant mortality by making it happen before anything important is done with the electronics.  It will usually die within the first week of operating 
24/7 or last relatively forever.

Frank Filippone
BMWRed735i at Gmail.com

On 6/1/2024 11:55 PM, Richard Man via LUG wrote:
> John, failed CONTROLLER
>
> On Sat, Jun 1, 2024 at 8:35 AM John McMaster via LUG<lug at leica-users.org>
> wrote:
>
>> I have had RAID 1 and RAID 5 arrays with a failed disk and had no issues
>> getting back to normal….
>>
>> john
>>
>> From: LUG<lug-bounces+john=mcmaster.co.uk at leica-users.org>  on behalf of
>> Eddy Willems<eddy at altphoto.be>
>> Date: Saturday, 1 June 2024 at 15:59
>> To: Leica Users Group<lug at leica-users.org>
>> Cc: Frank Filippone<bmwred735i at gmail.com>
>> Subject: Re: [Leica] [Leica} Tina's Drobos... Update: All loaded.
>> I hope everything turns out well Tina, I have had two Nas, correctly set
>> according to the manufacturer, they both had a disk that broke at some
>> point and despite the promise that everything would be fine with that
>> setting, nothing ever happened restored. I must say that I know very
>> little about computers; So I blame it on my lack of knowledge, but if
>> you set everything up as it should be and the manufacturer promises a
>> complete recovery of all data and it doesn't happen, you are left with
>> an immense hangover and you lose everything on the NAS; Greetings
>>
>>
>>
>> _______________________________________________
>> Leica Users Group.
>> Seehttp://leica-users.org/mailman/listinfo/lug  for more information
>>
>