[Leica] Windows 11
Jayanand Govindaraj
jayanand at gmail.com
Wed Jun 30 06:40:28 PDT 2021
One part of the jigsaw has been decoded!
https://www.howtogeek.com/738163/why-does-windows-11-need-tpm-2.0/
Cheers
Jayanand
On Tue, Jun 29, 2021 at 11:37 AM Frank Filippone via LUG <
lug at leica-users.org> wrote:
> I got a processor not good enuf warning.
> Here is the most likely reason:
>
> The CPU requirement may be more or less of a problem than it initially
> seems. Microsoft has a relatively short list of supported CPUs from three
> major manufacturers (AMD, Intel, and Qualcomm) that generally goes back to
> Ryzen 2500 or Intel 8th generation Core—no farther.
>
> On Mon, Jun 28, 2021 at 3:59 PM Jayanand Govindaraj via LUG <
> lug at leica-users.org> wrote:
>
> > Here is a more nuanced take on upgrading to Windows 11:
> >
> >
> >
> https://arstechnica.com/gadgets/2021/06/heres-what-youll-need-to-upgrade-to-windows-11/
> >
> > Cheers
> > Jayanand
> >
> > On Mon, Jun 28, 2021 at 10:10 PM Jim Nichols <jhnichols at lighttube.net>
> > wrote:
> >
> > >
> > > > On 28/06/2021 10:29, Jayanand Govindaraj via LUG wrote:
> > > >> Make sure you meet all the conditions, and approach Secure Boot with
> > > >> some
> > > >> trepidation. I just decided to get my computer ready for Windows 11,
> > and
> > > >> enabled Secure Boot on my PC, and it would not even boot into BIOS
> > again
> > > >> after that. I have just wasted half a day debugging that, gaining
> > > >> access to
> > > >> BIOS again, and turning the Secure Boot setting off to get the
> > computer
> > > >> working again! The culprit was my Asus/Nvidia Graphics Card which
> > > >> seems to
> > > >> be not compliant - it is a bit long in the tooth as GPUs go, but is
> > > >> working
> > > >> very well, so I have to figure out whether an upgrade lies in my
> > > >> future or
> > > >> not! I will probably just postpone migrating to Windows 11 for the
> > time
> > > >> being - as of now there does not seem to be any compelling reason to
> > > >> do so,
> > > >> other than it is free!
> > > >>
> > > >> Cheers
> > > >> Jayanand
> > > >>
> > > >>
> > > >>
> > > >> On Sun, Jun 27, 2021 at 6:09 AM Ken Carney via LUG <
> > lug at leica-users.org
> > > >
> > > >> wrote:
> > > >>
> > > >>> OK, we are both ready to upgrade to Windows 11 for a “calm and
> > creative
> > > >>> experience”. Per Microsoft.
> > > >>>
> > > >>> Sent from my iPhone
> > > >>>
> > > >>>> On Jun 26, 2021, at 6:04 PM, Sonny Carter via LUG
> > > >>>> <lug at leica-users.org>
> > > >>> wrote:
> > > >>>> Yes, Ken,
> > > >>>>
> > > >>>> Sharpen was running really slowly on my 2 gb video card. I
> contacted
> > > >>> their
> > > >>>> support with a list of my home-built computer innards, and they
> > > >>>> suggested
> > > >>>> an 8 gig card. It runs great now.
> > > >>>>
> > > >>>>
> > > >>>> Regards,
> > > >>>>
> > > >>>> Sonny
> > > >>>> http://sonc.com <http://sonc.com/look/>
> > > >>>>
> > > >
> > > >
> > > > _______________________________________________
> > > > Leica Users Group.
> > > > See http://leica-users.org/mailman/listinfo/lug for more information
> > >
> > > --
> > > Jim Nichols
> > > Tullahoma, TN USA
> > >
> > >
> > > _______________________________________________
> > > Leica Users Group.
> > > See http://leica-users.org/mailman/listinfo/lug for more information
> >
> > _______________________________________________
> > Leica Users Group.
> > See http://leica-users.org/mailman/listinfo/lug for more information
>
> --
> Frank Filippone
> BMWRed735i at gmail.com
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
More information about the LUG
mailing list