[Leica] Enhance Details

Tue Feb 12 22:52:12 PST 2019

Read the following from Adobe:

Supported image formats

Enhance Details is only applicable to Bayer and X-Trans mosaic raw files.
Unsupported file formats

Enhance Details does not apply to the following types of source images:

    Non-raw files such as a JPEGs, TIFFs, and HEICs
    Linear DNGs (including HDR and pano DNG images previously created inside
Lightroom and Camera Raw)
    DNG proxies and Smart Previews
    Monochrome raw files (such as Leica M MONOCHROM)
    Four-color cameras
    Foveon sensor images
    Fujifilm cameras with SR, EXR, or 2x4 mosaic sensors.
    Canon S-RAW/M-RAW files
    Nikon small raw files
    Pentax Pixel Shift Resolution (PSR) files
    Sony ARQ files
    Video files

There is absolutely no reason why the Sony Raw images should not work....

Having updated my computer to Windows 10 V 1809, I proceeded to start up LR
CCC... and pull up some images from my Sony A7rii......Now I get told that
my images, of type .ARW ( A Sony Raw File Format) are the wrong type.  ie,
it still does not work.....

John is right.. Why do I need this bit of non-working SW nor do I have the
patience to deal with finding out what is wrong......

I used to live without it, and I will move forward without it.....

Maybe, some day in the far off future, Adobe will tell me what DOES work
with this feature.......

Frank Filippone

Red735i at verizon.net

-----Original Message-----
From: LUG [mailto:lug-bounces+red735i=verizon.net at leica-users.org] On Behalf
Of Frank Filippone via LUG
Sent: Tuesday, February 12, 2019 1:56 PM
To: 'Leica Users Group'
Cc: Frank Filippone
Subject: Re: [Leica] Enhance Details

Tina.... it is not the location I found to do the updates.... I used the
Windows function under SETTINGS and then UPDATE..... but that may not
matter.....

Not sure what is going on.. it took my computer about a minute to get to
100% then it started all over again......and now I am at a whopping 5%.....

I can guess some of the problem is that even though I have auto update on
Windows turned on, apparently this ( Other?) updates do not get installed
until someone at MS decides I can actually get the update.....  and pushes a
button in MS HQ.

I found a note somewhere that this specific version (1809) is not yet ready
for automatic distribution......  I wonder what that means.....

Frank Filippone

Red735i at verizon.net

I think I found it here:
https://www.microsoft.com/en-us/software-download/windows10?ranMID=43674&ran
EAID=je6NUbpObpQ&ranSiteID=je6NUbpObpQ-dnV9Aavrkc4zvHRYoRsOHg&epi=je6NUbpObp
Q-dnV9Aavrkc4zvHRYoRsOHg&irgwc=1&OCID=AID681541_aff_7795_1243925&tduid=(ir__
ki26z1m9evjtwzd23ygibep9fn2xhemxdxx9jwgt00)(7795)(1243925)(je6NUbpObpQ-dnV9A
avrkc4zvHRYoRsOHg)()&irclickid=_ki26z1m9evjtwzd23ygibep9fn2xhemxdxx9jwgt00

It has been downloading and updating for about an hour now and is 76%
finished.  I hope this is the answer!

Tina

On Tue, Feb 12, 2019 at 4:31 PM Frank Filippone via LUG
<lug at leica-users.org>
wrote:

> I tracked down MY problem......
>
> Yes, I am running Windows 10, with all the updates up to date.
> I then did the following....
> Go to SETTINGS
> Go to SYSTEM
> Go to ABOUT......... most of the way down the page, is the section
> labeled...... WINDOWS SPECIFICATIONS
> Where you will find you are running Windows 10 and the VERSION
>
> I am running Version 1803
>
> The applicable version to run the new Adobe Enhance is version 1809 or
> later.....
>
> The reason I can not use this "feature" is that I am running an older
> version.....
>
> Tina???????
>
> Now I will go off and figure out how to get the latest upgrade to Windows
> to
> 1809 or later......
>
>
>
> Frank Filippone
>
> Red735i at verizon.net
>
>
> -----Original Message-----
> From: LUG [mailto:lug-bounces+red735i=verizon.net at leica-users.org] On
> Behalf
> Of Tina Manley via LUG
> Sent: Tuesday, February 12, 2019 12:42 PM
> To: MUGers at yahoogroups.com; Leica Users Group; paw; seephoto; Olympus
> Camera
> Discussion
> Cc: Tina Manley
> Subject: [Leica] Enhance Details
>
> PESO:
>
> The Adobe LR upgrade today says that it includes the new Enhance Details
> feature.  I've upgraded and my Windows is up to date; however, when I go
to
> Photo > Enhance Details, a pop up window tells me I need to upgrade
Windows
> 10 to October 2018 before I can use this feature.
>
> My Windows is totally up to date.  Google searches tell me nothing.
> Anybody have a clue??
>
> Tina
>
> --
> Tina Manley
> www.tinamanley.com
> tina-manley.artistwebsites.com
> http://www.pbase.com/tinamanley
> <
>
http://www.alamy.com/stock-photography/3B49552F-90A0-4D0A-A11D-2175C937AA91
> /Tina+Manley.html
>
<http://www.alamy.com/stock-photography/3B49552F-90A0-4D0A-A11D-2175C937AA91
/Tina+Manley.html>
> >
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>

-- 
Tina Manley
www.tinamanley.com
tina-manley.artistwebsites.com
http://www.pbase.com/tinamanley
<http://www.alamy.com/stock-photography/3B49552F-90A0-4D0A-A11D-2175C937AA91
/Tina+Manley.html>

_______________________________________________
Leica Users Group.
See http://leica-users.org/mailman/listinfo/lug for more information