[Leica] Epsom P800 Update

Sun Apr 22 09:06:27 PDT 2018

But Tom's office is way down the hall and he needs wireless, too!

We do have cable.  I'll try calling them next week and see what they can do.

Thanks,

Tina

On Sun, Apr 22, 2018 at 11:54 AM, Dennis Kushner via LUG <
lug at leica-users.org> wrote:

> Your router should be in your computer room as close as possible
> to your computer for wireless. If you have cable modem, service can
> be in the basement to a splitter, 1 RG6 cable to TV & 1 RG6  cable
> to your wireless router modem.
> Have your ISP locate it there.as it is not working properly.
>
> On Sun, Apr 22, 2018 at 11:35 AM, Tina Manley via LUG <lug at leica-users.org
> >
> wrote:
>
> > I know nothing about ISP's and internet and how everything works.  The
> > local ISP came out and installed our router.  I bought a booster thingy
> > from Amazon.  Maybe I'd better have the ISP come back out and install
> > something else??
> >
> > The printer is not working at all now through Image Print.  I can print a
> > test page from my computer but the printer is not talking to Image Print.
> > I've been on the phone with them and we thought it was an IP address
> > conflict but that wasn't it.  I'd be happy to have a print in an hour
> right
> > now!!
> >
> > Tina
> >
> > On Sun, Apr 22, 2018 at 11:30 AM, John McMaster <john at mcmaster.co.uk>
> > wrote:
> >
> > > As others have said, WiFi speed is nothing to do with your ISP.  I live
> > in
> > > a house with +2 foot thick stone walls, the whole house is covered by
> two
> > > Open-Mesh A60 Access Points - both plugged into the LAN where cabling
> is
> > > possible.
> > >
> > > john
> > >
> > > -----Original Message-----
> > > From: LUG [mailto:lug-bounces+john=mcmaster.co.uk at leica-users.org] On
> > > Behalf Of Tina Manley via LUG
> > > Sent: 22 April 2018 15:55
> > > To: Leica Users Group
> > > Cc: Tina Manley
> > > Subject: Re: [Leica] Epsom P800 Update
> > >
> > > My wifi is very, very slow.  We have a monopoly, local ISP here and the
> > > wifi often drops out.  The router is located in the basement several
> > > concrete walls away from me.  I have boosters in order to get any
> signal
> > at
> > > all.
> > >
> > > I'm not in a hurry to print, though, so it's fine.
> > >
> > > Tina
> > >
> > > On Sat, Apr 21, 2018 at 10:19 PM, Jayanand Govindaraj via LUG <
> > > lug at leica-users.org> wrote:
> > >
> > > > I got both to work right out of the box. Using the wireless mode, it
> > > still
> > > > takes me only 8-10 minutes per print. The Wifi router is close by,
> > > though,
> > > > unimpeded by walls, so that could make a difference.
> > > > Cheers
> > > > Jayanand
> > > >
> > > > On Sat, Apr 21, 2018 at 8:41 PM, chris williams via LUG <
> > > > lug at leica-users.org
> > > > > wrote:
> > > >
> > > > > Ah ok you have the exact opposite issue I have! Even with 500/500
> up
> > > and
> > > > > down FIOS, I couldn’t get wireless to work so I just use USB.
> > > > >
> > > > > Weird!!
> > > > >
> > > > > Chris Williams
> > > > > www.zoeicaimages.net
> > > > > 504-231-6261
> > > > >
> > > > >
> > > > > > On Apr 21, 2018, at 11:03 AM, Tina Manley via LUG <
> > > lug at leica-users.org
> > > > >
> > > > > wrote:
> > > > > >
> > > > > > Chris -
> > > > > >
> > > > > > It's probably because I'm sending the signals to the printer
> > > > wirelessly.
> > > > > > The USB connection did not work and hours on the phone with Epson
> > and
> > > > > > several new cables did not help.  It works fine wirelessly, but
> > it's
> > > > > slow.
> > > > > >
> > > > > > I'm making 14 of the prints on Epson Metallic and will then make
> 30
> > > on
> > > > > > Canson Baryta but at 13x19.  I have until the middle of June to
> get
> > > > them
> > > > > > done ;-)
> > > > > >
> > > > > > Tina
> > > > > >
> > > > > > On Sat, Apr 21, 2018 at 10:56 AM, chris williams via LUG <
> > > > > > lug at leica-users.org> wrote:
> > > > > >
> > > > > >> Hmm one hour? I’m running about 5 minutes on a 17x22. What
> > settings
> > > > are
> > > > > >> you using? I love the 800.
> > > > > >>
> > > > > >> I use Epson Legacy Paltine.
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >> Chris Williams
> > > > > >> www.zoeicaimages.net
> > > > > >> 504-231-6261
> > > > > >>
> > > > > >>
> > > > > >>> On Apr 21, 2018, at 10:54 AM, Tina Manley via LUG <
> > > > lug at leica-users.org
> > > > > >
> > > > > >> wrote:
> > > > > >>>
> > > > > >>> PESO:
> > > > > >>>
> > > > > >>> It took several days but I've finally gotten my new printer and
> > > > > software
> > > > > >>> working.   I'm printing on Epson Metallic Luster paper - 17x22
> -
> > > > right
> > > > > >>> now.  I've made 5 prints so far and they are all perfect.  The
> > > colors
> > > > > >> match
> > > > > >>> the ones on my monitor exactly.
> > > > > >>>
> > > > > >>> It takes about an hour to print one 17x22 but I'm happy.  Image
> > > Print
> > > > > >>> handles everything.  I just load the photo and paper profile,
> set
> > > the
> > > > > >>> margins, and press Print.  No wasted paper or ink, so far!!
> > > > > >>>
> > > > > >>> Tina
> > > > > >>>
> > > > > >>> --
> > > > > >>> Tina Manley
> > > > > >>> www.tinamanley.com
> > > > > >>> tina-manley.artistwebsites.com
> > > > > >>> http://www.alamy.com/stock-photography/3B49552F-90A0-
> > > > > >> 4D0A-A11D-2175C937AA91/Tina+Manley.html
> > > > > >>>
> > > > > >>> _______________________________________________
> > > > > >>> Leica Users Group.
> > > > > >>> See http://leica-users.org/mailman/listinfo/lug for more
> > > information
> > > > > >>
> > > > > >> _______________________________________________
> > > > > >> Leica Users Group.
> > > > > >> See http://leica-users.org/mailman/listinfo/lug for more
> > > information
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Tina Manley
> > > > > > www.tinamanley.com
> > > > > > tina-manley.artistwebsites.com
> > > > > > http://www.alamy.com/stock-photography/3B49552F-90A0-
> > > > > 4D0A-A11D-2175C937AA91/Tina+Manley.html
> > > > > >
> > > > > > _______________________________________________
> > > > > > Leica Users Group.
> > > > > > See http://leica-users.org/mailman/listinfo/lug for more
> > information
> > > > >
> > > > > _______________________________________________
> > > > > Leica Users Group.
> > > > > See http://leica-users.org/mailman/listinfo/lug for more
> information
> > > > >
> > > >
> > > > _______________________________________________
> > > > Leica Users Group.
> > > > See http://leica-users.org/mailman/listinfo/lug for more information
> > > >
> > >
> > >
> > >
> > > --
> > > Tina Manley
> > > www.tinamanley.com
> > > tina-manley.artistwebsites.com
> > > http://www.alamy.com/stock-photography/3B49552F-90A0-
> > > 4D0A-A11D-2175C937AA91/Tina+Manley.html
> > >
> > > _______________________________________________
> > > Leica Users Group.
> > > See http://leica-users.org/mailman/listinfo/lug for more information
> > >
> > > _______________________________________________
> > > Leica Users Group.
> > > See http://leica-users.org/mailman/listinfo/lug for more information
> > >
> >
> >
> >
> > --
> > Tina Manley
> > www.tinamanley.com
> > tina-manley.artistwebsites.com
> > http://www.alamy.com/stock-photography/3B49552F-90A0-
> > 4D0A-A11D-2175C937AA91/Tina+Manley.html
> >
> > _______________________________________________
> > Leica Users Group.
> > See http://leica-users.org/mailman/listinfo/lug for more information
> >
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>

-- 
Tina Manley
www.tinamanley.com
tina-manley.artistwebsites.com
http://www.alamy.com/stock-photography/3B49552F-90A0-4D0A-A11D-2175C937AA91/Tina+Manley.html