[Leica] Fuji RMS Scans

[Tina Manley]

Thanks, Eddy.   I will try that for the slides that are giving me problems
but there is no way I could camera-scan all of my film.  With the Nikon
scanner, I just load them up in the bulk loader and scan 50 at a time.
With the camera set-up (I have a Beseler Slide Duplicator that I set up for
that purpose), each slide has to be done individually.  It's worth it for
the problem ones, though!

Tina

On Mon, Jun 26, 2017 at 2:56 PM, Eddy Willems <eddy at altphoto.be> wrote:

> Tina
>  I would try to have a balg with a slide copying adapter on an digital
> camera (our sl) and made the repro this way,
> this will work faster and you have more contol and beter (sharper) results
> best regards
>
> Op 26/06/17 om 17:12 schreef Tina Manley:
>
>> PESO:
>>
>> I'm scanning some slides from 2000 made on Fuji RMS which is a slide film
>> that is made to be pushed.  It's giving me fits to try and scan.
>>
>> http://www.pbase.com/tinamanley/image/165728353/original
>>
>> The highlights seem to smear - white areas above windows and around
>> mother's face.  I've reduced highlights as much as I can without causing
>> the whites to go gray.  I've also reduced the saturation quite a bit
>> because it was garishly over saturated.
>>
>> Any suggestions on how to scan this would be greatly appreciated.
>>
>> Tina
>>
>>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>



-- 
Tina Manley
www.tinamanley.com
tina-manley.artistwebsites.com
http://www.alamy.com/stock-photography/3B49552F-90A0-4D0A-A11D-2175C937AA91/Tina+Manley.html