[Leica] Voigtlander Ultron 35 1.7 focus problem FIXED

[Jim Nichols]

Great news, Kyle.  I understand about the ball bearing, having struggled 
with the same thing on an early Leica Summarit 50/1.5. Congratulations 
on your perseverance.

Jim Nichols
Tullahoma, TN USA

On 12/24/2015 6:33 PM, kyle cassidy on the lug wrote:
> I posted a few weeks ago that my Ultron had stopped focusing, although it was still coupling in the back and everything seemed to be moving properly, the focus was way off. So, it sat on a shelf for a while and I switched to a Summwhatnot 35 3.5 I had lying around while I tried to figure out what to do. I realized how much I used the 35 and how useful the 1.7 aperture is — having to shoot at 3.5 seemed close to useless, so I thought about just being a new Ultron, while picking up a new one i noticed that the barrel was rock steady while mine had a little bit of play in it. Could this be it?
>
> I looked at the lens on the shelf. There was a bottle of Ardbeg single malt Islay scotch next to it.
>
> So, I did the only sensible thing, I drank the scotch and took the lens apart with a Dewalt drill and a precision phillips head screwdriver bit.
>
> Behind the aperture ring I found three very loose screws that held the two halves of the lens together. I tightened these down and spent the next four hours trying to get the click-stop detente ball bering back in the right place.  When that finally happened, the rest of the re-assembly was easy and focusing was restored.
>
> I’m posting this here for posterity.
>
> kc
>
>
> Tags: voigtlander ultron 1.7 focus issues barrel wobble loose screws DIY
>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>