[Leica] how do you organize the lenses in your camera bag?

Sonny Carter sonc.hegr at gmail.com
Fri Dec 26 08:57:34 PST 2014


I think if I were home-building a rig to hold two lenses worth several
thousand dollars each together, I'd invest in drilling a hole between the
two caps and poking a fifty cent stainless steel bolt through the hole, and
secure it with a twenty cent stainless steel lock washer and a thity cent
stainless steel lock nut.

Just my two  cents worth of advice.

On Fri, Dec 26, 2014 at 10:17 AM, Wilbur Norman <coupdefoudrellc at gmail.com>
wrote:

> Thanks for the glue tip, Mark.
> Wilbur
>
> ********************
> On Dec 25, 2014, at 11:30 PM, Mark Rabiner wrote:
>
> > A&B Epoxy. And rough up the flat edges of the lens back caps first.
> >
> >
> > On 12/25/14 12:38 PM, "Wilbur Norman" <coupdefoudrellc at gmail.com> wrote:
> >
> >> You can buy a purpose-built back-to-back Leica lens cap device for
> about $8.
> >> Many of them have no septum/solid wall between them, however, so you
> always
> >> need to have two lenses attached so as to not get dust into the back of
> the
> >> one lens. I usually only carry 3 lenses so one is on the camera and two
> are
> >> stashed back-to-back so an open wall between the rear of the lenses is
> not a
> >> big problem. If going to a dusty place the type with a wall will be
> >> (obviously)  best.
> >>
> >> I have glued two rear lens caps together but some glue tends to dry out
> over
> >> time. I once nearly dropped lenses when that old glue disintegrated. I
> am
> >> going to experiment with Gorila Glue on this next attempt (but for Fuji
> >> lenses, not Leica ones as I already have two manufactured ones for the
> Leica
> >> lenses.)
> >>
> >> Wilbur
> >>
> >>
> >> **************
> >> On Dec 24, 2014, at 3:13 PM, RicCarter wrote:
> >>
> >>> me, too
> >>>
> >>> be sure to use one of the A/B epoxies to hold against the stress and
> strain
> >>>
> >>> ric
> >>>
> >>>
> >>>> On Dec 24, 2014, at 5:05 PM, Jay Burleson <leica at jayburleson.com>
> wrote:
> >>>>
> >>>> So I glued two M rear lens caps back to back (made 2 sets of them)
> and now I
> >>>> can easily stash them in the tall spaces without having to worry
> about them
> >>>> bouncing on top of one another
> >>>
> >>>
> >>> _______________________________________________
> >>> Leica Users Group.
> >>> See http://leica-users.org/mailman/listinfo/lug for more information
> >>>
> >>
> >>
> >> _______________________________________________
> >> Leica Users Group.
> >> See http://leica-users.org/mailman/listinfo/lug for more information
> >
> >
> >
> >
> > --
> > Mark William Rabiner
> > Photographer
> > http://gallery.leica-users.org/v/lugalrabs/
> >
> >
> >
> > _______________________________________________
> > Leica Users Group.
> > See http://leica-users.org/mailman/listinfo/lug for more information
> >
>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>



-- 
Regards,

Sonny
http://sonc.com/look/
Natchitoches, Louisiana
1714
Oldest Permanent Settlement in the Louisiana Purchase

USA


More information about the LUG mailing list