[Leica] how do you organize the lenses in your camera bag?

[Frank Filippone]

Good.  All set to sand/Dremel away later today....  I have 2 EBay Leica caps
( cost total for 2 was about $3) that have a raised outer lip.
Will get rid of the lip and flatten the surfaces, then use the glue.... 

Frank Filippone
Red735i at verizon.net

bag?

Yes, that is exactly what I do. For example, the Fuji X rear caps have the
raised edge and the raised Fuji letters. I file all that away with the
Dremel, takes just a few minutes. This has the added advantage of leaving
the surfaces a bit rough which further facilitates the bonding.

Cheers,
Nathan

> Yes, I WILL try Epoxy...
> 
> The silicon lasted until I got half way through the trip.... it came 
> off in a perfect beer coaster flat "plate".  Had all the texture of the
cap.
> 
> At least the caps were not damaged.....
> 
> You say you did something with the Dremel.... usually the caps have a 
> raised "rim" around them, that prevents the 2 halves from completely 
> touching.. did you remove the rim?  Something else?
> 
> Frank Filippone
> Red735i at verizon.net
> 
> Hi Frank, I have used Epoxy for this for more than 10 years 
> (pre-dating my digital days), and have never had the two rear caps come
apart.
> 
> Cheers,