Archived posting to the Leica Users Group, 2021/11/10

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Face Plant and Monitors
From: sonc.hegr at gmail.com (Sonny Carter)
Date: Wed, 10 Nov 2021 11:16:49 -0600
References: <CA+yJO1Cgp4VCCW0BFzzcB855P+cVOocRoRFYojjAb7SJ2fx5bQ@mail.gmail.com> <f61b061d-9b99-344a-f697-fedd73697c6f@gmail.com> <CA+yJO1BpU7uPunzr+9o50DsXaqvA8i8KgUT40Hcu+qxgEPFkfg@mail.gmail.com>

Did you try a different cord?

On Wed, Nov 10, 2021 at 9:16 AM Tina Manley via LUG <lug at leica-users.org>
wrote:

> Thanks, LUG.  In spite of all of the advice and rolling my settings back 2
> days, I never could get the 2nd monitor to work.  Tom had an old ViewSonic
> monitor that he wasn't using so I hooked that up and it works fine.  I
> guess that means my Dell monitor bit the dust.  I'll start shopping for a
> new one.
>
> Thanks!
>
> Tina
>
> On Wed, Nov 10, 2021 at 1:24 AM Frank Filippone via LUG <
> lug at leica-users.org>
> wrote:
>
> > I had a similar problem... and it drove me nuts too....
> >
> > My fix:
> >
> > Open SETTINGS  ( the gear shaped icon)
> >
> > Go to DISPLAY
> >
> > You should see 2 rectangles, labeled 1 and 2.  One will be a big
> > rectangle, the other is small.....
> >
> > In MY CASE, the Big one was number 1, the small one 2.
> >
> > The SMALL one was on the LEFT side of the big one......   And therein is
> > the problem for me....
> >
> > The fix I used..... mouse point to the small one, hold down the left
> > mouse button, and move it to the right side.....   Done.
> >
> > Mine worked with this move......
> >
> > Did this fix your setup?
> >
> >
> > Frank Filippone
> > BMWRed735i at gmail.com
> >
> > Windows
> > > updated itself automatically today and when it came back on, my second
> > > monitor is not working.  I cannot use Photoshop without two monitors
> and
> > > this is driving me crazy.  My main monitor is an Eizo CE240W and that's
> > > working fine.  The second monitor is a Dell 2007WFP and it is
> "inactive"
> > in
> > > the settings menu.  I have uninstalled and reinstalled it.  I have
> > searched
> > > for driver updates (it is up to date).  The monitor shows up but stays
> > > dark.  When I try to extend it from the original monitor, it sometimes
> > > loses both monitors which terrifies me and causes screams and cursing
> > only
> > > cured by hitting "Windows" and P and getting the menu back.
> > >
> > > I'm on Windows 10 (should I update to 11)??
> > >
> > > Help.  TIA
> > >
> > > Tina
> > >
> >
> > _______________________________________________
> > Leica Users Group.
> > See http://leica-users.org/mailman/listinfo/lug for more information
>
>
>
> --
> https://tinamanley.photoshelter.com/index
> https://pbase.com/tinamanley
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>
-- 
Regards,

Sonny
http://sonc.com <http://sonc.com/look/>
Natchitoches, Louisiana
1714
Oldest Permanent Settlement in the Louisiana Purchase

USA


In reply to: Message from tmanley at gmail.com (Tina Manley) ([Leica] Face Plant and Monitors)
Message from bmwred735i at gmail.com (Frank Filippone) ([Leica] Face Plant and Monitors)
Message from tmanley at gmail.com (Tina Manley) ([Leica] Face Plant and Monitors)