Archived posting to the Leica Users Group, 2021/08/01
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]That IUFOO should work over the top of the lens. It is listed for al versions from 1956 to end of production. You must have a fairly early version. On Sun, Aug 1, 2021, 7:58 PM Jeffery Smith via LUG <lug at leica-users.org> wrote: > This was my initial attempt, and it is way too big in diameter. > https://www.ebay.com/itm/144075775152 < > https://www.ebay.com/itm/144075775152> > > Is there a step up that I can attach to the lens, with this hood attaching > it the step up? And if so, would KEH have one? > > Jeffery > > > On Aug 1, 2021, at 5:52 PM, Don Dory via LUG <lug at leica-users.org> > wrote: > > > > The A36 filter is a slip on. You could look for a SOOGZ which adapts A36 > > lens to Summicron filters(the book says 42mm but I suspect a misprint as > > all my Summicrons are 39mm) > > > > Lens hoods get complicated. You can start with the pretty common FIKUS > or > > item number12530; this is a variable hood that will shrink or expand from > > 35mm to 135. Your other choice on hood is the IUFOO or 12575. This hood > > fits 90 and 135 Hektor lenses and can be silver/black or all black. > > Various engravings related to fitment. > > > > On Sun, Aug 1, 2021 at 7:35 PM Jeffery Smith via LUG < > lug at leica-users.org> > > wrote: > > > >> The hood model is A36? I know that a 39mm filter size is too large, but > >> 36mm might be correct, if the 36 in A36 refers to that. > >> > >>> On Aug 1, 2021, at 5:33 PM, Don Dory via LUG <lug at leica-users.org> > >> wrote: > >>> > >>> According to my pocket guide it is a A36 if an early model or E39. I > >>> suspect you have two E39's so you need an A36. As far as lens hoods > go, > >> if > >>> you have a narrow cut on the very front knurling you should be able to > >> use > >>> a hood for a screw mount Summicron as I don't think that diameter > changed > >>> in the screw mount era. > >>> > >>> On Sun, Aug 1, 2021 at 7:17 PM Jeffery Smith via LUG < > >> lug at leica-users.org> > >>> wrote: > >>> > >>>> My 90/4 Elmar LTM needs a lens hood, and I've already bought two that > >> are > >>>> too large. I've been sort of winging it poring over forums where the > >> lens > >>>> is being discussed, but there are apparently a lot of different 90/4 > >> Elmars > >>>> out there. This is the lens: > >>>> https://www.ebay.com/itm/144090296987 < > >>>> https://www.ebay.com/itm/144090296987> > >>>> > >>>> Anyone have any idea what the filter size for this lens is? I have all > >> of > >>>> Erwin Puts' books, but they are all in Louisiana at the moment. > >>>> > >>>> Jeffery > >>>> > >>>> _______________________________________________ > >>>> Leica Users Group. > >>>> See http://leica-users.org/mailman/listinfo/lug for more information > >>>> > >>> > >>> > >>> -- > >>> Don > >>> don.dory at gmail.com > >>> > >>> _______________________________________________ > >>> Leica Users Group. > >>> See http://leica-users.org/mailman/listinfo/lug for more information > >> > >> > >> _______________________________________________ > >> Leica Users Group. > >> See http://leica-users.org/mailman/listinfo/lug for more information > >> > > > > > > -- > > Don > > don.dory at gmail.com > > > > _______________________________________________ > > Leica Users Group. > > See http://leica-users.org/mailman/listinfo/lug for more information > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information >