Archived posting to the Leica Users Group, 2021/06/06
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]My guess is to let it go, if it?s working. On the other hand, if you have the install drive, for win 10, it gives you a repair option, and you can save your apps and files. I think the clean system install will let windows find the correct driver and install the card. If you feel shaky about that, maybe image your drive before you do anything else. (Sez the guy who just had to do a full clean install after a win 10 crash that wouldn?t let me repair.) SonC On Sun, Jun 6, 2021 at 9:32 PM Peter Klein via LUG <lug at leica-users.org> wrote: > Summary: The old Transcend 2-port USB 3 PCIe card in my PC died this > past week. It worked fine for years. I replaced it with a FebSmart > 2-port card. The replacement appears to work fine. But Device Manager > says that it's "not migrated due to to a partial or ambiguous match." > Should I be worried? > > Details: I just installed a "FebSmart" FS-U2-Pro USB 3.0 PCIe card, $13 > from Amazon. My computer is a Dell Optiplex 980, 8 GB memory, 450 GB > SSD system drive, 2000 GB data drive, Windows 10 Professional x64. The > Optiplex 980 is not officially compatible with Win10, but many 980 > owners have successfully upgraded. Mine has been happily running Win10 > since last year. I use USB 3 to back up my computer, and to download > files from my camera SD cards. > > I keep getting the error "Device not migrated" in the Device Manager > entries for the Renesas USB 3.0 Host Controller and Hub. Despite the > error, the USB card appears to work correctly. I can use it with my > Seagate portable hard drive (for backups), a SDI card reader, and > various flash drives. Speeds appear comparable with the old card. A 2GB > copy of RAW camera files from a card reader to my hard drive, and from > the hard drive to my backup USB drive all went flawlessly, and bit > compares of all these files showed no errors. > > The FebSmart card was supplied with a driver dated 2011(!). The > manufacturer's web site has the exact same driver. Windows loads very > recent Microsoft drivers (late 2020 and 2021). I have tried > uninstalling and reinstalling both drivers, and I get the same result. I > tried the remedies mentioned in various Web articles. No help. I > contacted the manufacturer and got the following reply: > > "Hello,I suggest you relaod System,for brand PCs some times it have some > limitations . Some brand PCs do not accept the device ,it is no way to > add it on . But if you reload systems all problems will be done." > > In other words, "just reinstall Windows and all your software." Ummm, no. > > Frankly, I'm not sure that the error message isn't bogus, since the card > works. So at this point, I can just run with the current card unless > something truly goes wrong, or replace it with a $20 Inatek card > (Chinese company), or a $37 StarTech card (made in Taiwan for a Canadian > company). Throwing much more money than that at the problem is probably > not worth it. I'll probably replace the PC in a year or two, but I'd > like to get a bit more life out of it for now. > > Any thoughts or suggestions happily considered. Thanks! > --Peter > > > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information -- Regards, Sonny http://sonc.com <http://sonc.com/look/> Natchitoches, Louisiana 1714 Oldest Permanent Settlement in the Louisiana Purchase USA