Archived posting to the Leica Users Group, 2014/05/01
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Thank you my friend! I?ve do all these things, trying infinity and closest distance position and I can?t assembly, maybe is needed an special tool?? I don?t want disable any other lens?. I know a technician man who is repairing cameras, first at all I will ask him, is the cheaper and faster way. Cheers! Lluis El 02/05/2014, a las 02:07, Geoff Hopkinson <hopsternew at gmail.com> escribi?: > Lluis you might have to line up the helical grooves to get it back > together. Try turning the focus ring to infinity or to minimum and see if > it fits together in those positions. Tka look at another lens for an > example. Do not pull the other lens apart. Watch what the brass inside part > does when you turn focus off the camera. > > > Cheers > Geoff > http://www.pbase.com/hoppyman > > > On 2 May 2014 09:50, Lluis Ripoll <lluisripollphotography at gmail.com> > wrote: > >> Thank you John, that's true and shall be considered too. >> >> Cheers! >> Lluis >> >> El 02/05/2014, a las 01:42, John McMaster <john at mcmaster.co.nz> >> escribi?: >> >>> True, but from here they are all a great distance and the Leica importer >> does the international shipping. I could not get suitable insurance inside >> NZ, so hand delivered, never mind internationally ;-) >>> >>> john >>> ________________________________________ >>> >>> Thank you John, I'm considering this possibility, it is one of my >> favorite lens, I will see what can I do and I want ask to Will van Manen, >> I >> think they can d o a good work too, much faster and cheaper than Leica. >>> >>> Cheers >>> Lluis >>> >>> El 02/05/2014, a las 01:27, John McMaster <john at mcmaster.co.nz> >> escribi?: >>> >>>> I did some of my lenses (but not my 75mm Summilux) with flange changes, >> but all have since been sent to Leica for calibration and factory >> 6-bitting. I would say that the 75mm Summilux is one that is likely to >> benefit from a visit to Leica.... Mine was there three times before they >> got the focus right ;-) But now, on the Monochrom particularly, it is a >> thing of wonder ;-) >>>> >>>> john >>>> ________________________________________ >>>> >>>> >>>> Thank you Steve, but this is a question of the assembling of the lens, >> once you disable the rear part the lens is disabled too, I will never do >> this again!!! >>>> >>>> Amiti?s >>>> Lluis >>>> >>>> >>>> El 02/05/2014, a las 00:45, Steve Barbour <steve.barbour at gmail.com> >> escribi?: >>>> >>>>> >>>>> On May 1, 2014, at 3:41 PM, Lluis Ripoll < >> lluisripollphotography at gmail.com> wrote: >>>>> >>>>>> I have bought a ROXSEN Detachable 6-bit code Leica M Mount to have >> coded my Summilux 75mm, but when I've unscrewed the screws the barrel was >> dismounted and now I'm unable to mount it again. Before to send to a >> repair >> service, there is some manual on line? ... I didn't found it... >>>>> >>>>> you may consider contacting Roxsen if possible... >>>>> >>>>> s >>>>>> >>>>>> Thank you! >>>>>> >>>>>> Cheers >>>>>> Lluis >>>>>> >>>>>> >>> >>> _______________________________________________ >>> Leica Users Group. >>> See http://leica-users.org/mailman/listinfo/lug for more information >> >> >> _______________________________________________ >> Leica Users Group. >> See http://leica-users.org/mailman/listinfo/lug for more information >> > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information