Archived posting to the Leica Users Group, 2010/10/07
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]There is an "M2" on the side of my 3502 adapter, so maybe it is an older one. I had to flip down the little door on the back of the adapter and flip a switch marked "GN" to get the GnC to appear. It seems to be working now. Thank you. And, my apologies to Ted and Tina for using the "F____" word! It reminds me of mentioning UV filters around Jim Brick! ;-) Tom Sent from my iPad On Oct 6, 2010, at 7:01 AM, Michiel Fokkema <michiel.fokkema at gmail.com> wrote: > I checked the Mezt website and it says that the version 5 of the sca > adapter > should work with the M9 > > Cheers, > > Michiel Fokkema > > On 6 October 2010 15:21, Stan Yoder <s.yoder at verizon.net> wrote: > >> On 10/5/10 8:21 PM, Tom Schofield wrote: >> >>> I found, much to my chagrin, that there is no ttl flash with an m9 and >>> sf20 or Metz 54mz + sca3502. >>> >> I thought so too, but I inquired of the Metz distributors and was informed >> that Guide Number Control [TTL] is a function of the _Manual_ mode with >> the >> M8/9. So then: >> >> M9 on, then Metz on. >> Select "M" with mode button >> While "M" _still blinking_, rotate wheel CCW one step. "GnC" will appear, >> and you're good to go. >> >> Stan Yoder >> >> _______________________________________________ >> Leica Users Group. >> See http://leica-users.org/mailman/listinfo/lug for more information >> > > > > -- > -------------------------------------------- > Fokkema Fotografie > www.michielfokkema.com > michiel.fokkema at gmail.com > GSM:+31 (0) 615569576 > > _______________________________________________ > Leica Users Group. > See http://leica-users.org/mailman/listinfo/lug for more information