[Leica] Hassy CFV workflow suggestions?

[rgacpa at yahoo.com (Bob Adler)]

Right now it isn't that way. CS4 can open the .fff file; LR can't.
But as I said just rename the file from .fff to .tif and it's EXACTLY the 
same data.
 Bob Adler
Palo Alto, CA
http://www.rgaphoto.com




________________________________
From: Richard Man <richard.lists at gmail.com>
To: Leica Users Group <lug at leica-users.org>
Sent: Sat, February 13, 2010 6:07:44 PM
Subject: Re: [Leica] Hassy CFV workflow suggestions?

I'm pretty sure the Adobe Photoshop and LR both use the ACR (Adobe Raw
Converter) engine inside? So if CS4 supports it and LR doesn't, then it may
just be a matter of time for the upgrade?

On Sat, Feb 13, 2010 at 7:59 AM, Bob Adler <rgacpa at yahoo.com> wrote:

> I hope I'm not being redundant with what other's have said here, but I
> don't think LR can import 3f files. CS4 can (Imacon just released the RAW
> converter for CS4) but LR can't.
>
> What you have to do is go in and change the .fff (or whatever it is for the
> files from the back) to .tif. Though you would think this would lose your
> RAW file abilities, it doesn't. It's still the RAW information. This 
> learned
> after a long conversation with an Imacon tech.
>
> Works very well for me with my Imacon scanned RAW (.fff) files into LR.
> Best,
> Bob
>  Bob Adler
> Palo Alto, CA
> http://www.rgaphoto.com
>
>
>
>
> ________________________________
> From: "afirkin at afirkin.com" <afirkin at afirkin.com>
> To: Leica Users Group <lug at leica-users.org>
> Sent: Sat, February 13, 2010 12:05:59 AM
> Subject: Re: [Leica] Hassy CFV workflow suggestions?
>
> George, rant away, I think we all understand ;-) If you don't change
> computers, the software last longer in my experience. But of course by
> buying the 39 you have pretty big files to deal with, not something my
> first iBook could deal with ;-)
>
> Cheers and good luck with LR. I really do like the workflow, and found
> phocus too "focused" on Blad alone.
>
> Alastair
>
>
> > Mark...nope..photoshop CS won't open em unless you "upgrade" to CS4 or
> > something else needlessly "feature rich"...
> > Alastair...thanks for that, I now see that LR can actually create finish
> > files and can use various plug ins and now realize that I can open the
> > files
> > in photoshop CS and NOT, importantly, "upgrade" to any "face
> recognizing",
> > "GPS locating" "made easy-for-you" "new and better" software...hell, I
> was
> > really upset that I had to "upgrade" to CS in the first place...not to
> > mention it took me a while to figure out how to stop iPhoto from grabbing
> > and "filing" all of my images...sorry for the rant...just can't stand the
> > constant forced march to having to continually spend more money to do the
> > same simple task. Anyway, now if I can figure out how the hell
> > LRs file model works so I can fit it into my dyslexic and disorganized
> > world
> > view, I'll be all set...but now I see at least I can create a giant
> output
> > file for printing from my print supplier...thanks very much! By the way,
> > Hasselblad's Phocus has no provisions for outputing files like LR does
> and
> > since it looks and works very similar to LR, I just assumed LR was
> equally
> > functionally disabled. I asked Hasselblad about whether they were at all
> > worried that other photo processing software that would need to import
> > Phocus files would alter them somehow and they said they didn't think any
> > file alteration would occur. I'm not so sure about that...so, Phocus is
> > out,
> > LR seems to be in and since I do no retouching and only minor alterations
> > in
> > levels I may not need to go to photoshop CS anymore...just hope I don't
> > have
> > to "upgrade" LR continuously from now on...Thanks again,
> > George
> > Chicago
> >
> >
> > On 2/12/10 8:28 AM, "lug-request at leica-users.org"
> > <lug-request at leica-users.org> wrote:
> >
> >> Message: 25
> >> Date: Fri, 12 Feb 2010 02:57:12 -0500
> >> From: afirkin at afirkin.com
> >> Subject: Re: [Leica] Hassy CFV workflow suggestions?
> >> To: "Leica Users Group" <lug at leica-users.org>
> >> Message-ID:
> >> <9f1b6d88c5bf21d0db2f9636da96a83c.squirrel at emailmg.globat.com>
> >> Content-Type: text/plain;charset=iso-8859-1
> >>
> >> George,
> >> The blad files are not really supported by the smaller companies. I"m
> >> about to get a portable storage device and it won't show the blad
> >> images.
> >> There was a small software called image converter I think, but in
> >> reality
> >> importing into lightroom and automatically converting the files into DNG
> >> is probably the best way for you to go and LR really does a great job
> >> with
> >> "printing" once you learn it.
> >>
> >> Cheers
> >>
> >> alastair
> >>
> >>
> >>> Hello...
> >>> I managed to aquire a CFV back for my Hassy V system (hurray!)
> >>> but am really stuck about software. All I want is a quick cheap easy
> >>> way
> >>> to
> >>> convert Hassy raw files to be able to use them in Photoshop without
> >>> having
> >>> to buy $800 bucks worth of Adobe's Creative Suite. I've got
> >>> Hasselblad's
> >>> Phocus software, which is like Lightroom but you don't have any output
> >>> flexibility (size of print etc) ...and Lightroom is just plain
> >>> frustrating and confusing to me. I don't want any features, filters,
> >>> post
> >>> processing gizmos, skins or any of that...just gimme a usable file in
> >>> my
> >>> Mac
> >>> version of Photoshop that I already own (CS I think) and let me make
> >>> prints!
> >>> Man, do I hate this fetish that software companies have for layering on
> >>> features that I don't want. In fact, I wish I didn't have to use
> >>> photoshop
> >>> at all and could use a cheap piece of open source software that has NO
> >>> features except file translation and output...period. Anyone got any
> >>> suggestions?
> >>> thanks
> >>> George
> >>> Chicago
> >>>
> >
> >
> > _______________________________________________
> > Leica Users Group.
> > See http://leica-users.org/mailman/listinfo/lug for more information
> >
>
>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>
>
>
>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>



-- 
// richard m: richard @imagecraft.com
// portfolio: <http://www.dragonsgate.net/pub/richard/PICS/AnotherCalifornia
>
blog: http://rfman.wordpress.com
// book: http://www.blurb.com/bookstore/detail/745963

_______________________________________________
Leica Users Group.
See http://leica-users.org/mailman/listinfo/lug for more information