Archived posting to the Leica Users Group, 2008/04/05

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Repair Help......
From: red735i at earthlink.net (Frank Filippone)
Date: Sat Apr 5 22:19:54 2008
References: <015e01c8979c$fd5caa20$f815fe60$@net> <20080406002350.20f29259@linux.site> <016201c897a2$c12eb920$438c2b60$@net> <a3f189160804052212i48176e02ga3b20ebd8847c33d@mail.gmail.com>

Sonny.. If I read you correctly, the interior of the rewind crank ( where
the prongs that engage the cassette) is screwed onto a shaft.  The top of
the shaft is where the crank attaches with a side mounted screw.

Remove the top, side mounted screw, then unscrew the prongs, remove, inspect
and grease, reassemble.

But the shaft seems to "free-wheel"  ( remember the Saab?) relative to the
prongs...... one moves, the other does not......which seems counter
intuitive to what you are speaking of,.......

Should I just try to screw in the prongs again and see what happens?  ( CW
or CCW???)

??????

Frank Filippone
red735i@earthlink.net


-----Original Message-----
From: lug-bounces+red735i=earthlink.net@leica-users.org
[mailto:lug-bounces+red735i=earthlink.net@leica-users.org] On Behalf Of
Sonny Carter
Sent: Saturday, April 05, 2008 10:13 PM
To: Leica Users Group
Subject: Re: [Leica] Repair Help......

Frank, if you lift the crank, you'll see a tiny set screw in the side.  I'm
not talking about the one on the top.  Check to see if the tiny one is
tight. If it is tight, then, you may need to take it out,  Then put
something like a tongue depressor or large flat screwdriver  in the slot
that engages the cassette from the bottom of the camera.  Use a small
screwdriver in that screw on the top of the rewind to hold it while you
unscrew the crank.

Underneath, you can inspect to see if there is damage, or the washers are
stuck together.  Some gel silicone lube might be nice here, sparingly. Then
repeat the process in reverse and you may have joy.

Be gentle.



On Sat, Apr 5, 2008 at 11:57 PM, Frank Filippone <red735i@earthlink.net>
wrote:

> I reviewed the LUG archives, and came up with a possible area to review,
> but
> he site is down... does anyone have a copy of this article by Kyle on
> fixing
> a rewind knob?
>
> http://www.asc.upenn.edu/usr/cassidy/leicaslacker/rewind.html
>
>
> Frank Filippone
> red735i@earthlink.net
>
>
>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information
>



-- 
Regards,

Sonny
http://www.sonc.com
Natchitoches, Louisiana
USA

Haikus are easy
But sometimes they don't make sense
Refrigerator

_______________________________________________
Leica Users Group.
See http://leica-users.org/mailman/listinfo/lug for more information



Replies: Reply from sonc.hegr at gmail.com (Sonny Carter) ([Leica] Repair Help......)
In reply to: Message from red735i at earthlink.net (Frank Filippone) ([Leica] Repair Help......)
Message from photo.forrest at earthlink.net (Philip Forrest) ([Leica] Repair Help......)
Message from red735i at earthlink.net (Frank Filippone) ([Leica] Repair Help......)
Message from sonc.hegr at gmail.com (Sonny Carter) ([Leica] Repair Help......)