Archived posting to the Leica Users Group, 2007/03/13

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] Slim 486 Filter; Tri-Elmar; Lens Caps; Coding
From: len-1 at comcast.net (Leonard Taupier)
Date: Tue Mar 13 12:13:01 2007
References: <C21CB2ED.1875B%eric.calderwood@btinternet.com>

This is where the Heliopan 55mm filter is a better fit for the 21mm  
and 24mm ASPH's and the older Tri-Elmar. They all use the same hood  
and they all fit fine.

Len


On Mar 13, 2007, at 3:58 PM, Eric Calderwood wrote:

> A word of caution.
>
> I had the SLIM B+W 489 in 55mm for use on my 24 f2.8 asph, however  
> I found
> that the outer diameter of the SLIM filter is just greater than  
> that of the
> normal B+W F-Pro 489 by enough to prevent the hood from fitting.  
> The hood
> has two locating tabs that are at 12 o'clock and 6 o'clock on the  
> inner
> edges did not clear the filter and thus prevented it from going on far
> enough to lock.
>
> Eric
>
> On 13/3/07 19:39, "Robert Rose" <robert.rose@mac.com> wrote:
>
>> I just got a B+W 489, and here is something I never thought about:
>>
>> The filter is a SLIM, which means that you need to use a push on  
>> cap, and
>> that the Leica snap caps won't work.  The filter comes with the  
>> classic
>> Schneider Krueznach Optik push on cap, and this actually works  
>> really well
>> for a Tri-Elmar.  The metal lens hood can be slipped over the  
>> filter, and
>> can be stored in reverse with the Schneider cap on.  I could not  
>> use the
>> Leica push on cap in this way, since the Leica cap is too deep.
>>
>> So, for the Tri-Elmar, the SLIM filter is very good thing.  The  
>> slip on cap
>> also seems to work fine for the the other lenses, in fact I like  
>> it better
>> than the snap cap over a filter.  The 35mm and 28mm lenses have  
>> that hood
>> thing, so you don't need a separate cap.
>>
>> I bet the Schneider replacement cap costs less than a Leica cap, too!
>>
>> So far I don't see any magenta fringing on the Tri-Elmar, so I am  
>> not sure
>> there is a reason to rush out and get it coded.
>>
>> Cheers,
>> Bob Rose
>>
>>
>>
>> _______________________________________________
>> Leica Users Group.
>> See http://leica-users.org/mailman/listinfo/lug for more information
>
>
>
> _______________________________________________
> Leica Users Group.
> See http://leica-users.org/mailman/listinfo/lug for more information


In reply to: Message from eric.calderwood at btinternet.com (Eric Calderwood) ([Leica] Slim 486 Filter; Tri-Elmar; Lens Caps; Coding)