Archived posting to the Leica Users Group, 2006/11/14
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Nah, nothing wrong with Doug's approach. Yours is the sanctioned by "How to Do it the Color Managed Ways" committee. Doug uses the "I know exactly the single output device (printer, ink and paper) I want and as long as my monitor matches that, everything is fine" method. The latter is just fine as long as you stay with a single output chain (of printer, ink and paper) At 04:03 PM 11/14/2006, G Hopkinson wrote: >Well Doug, we all know that your end results in print are superb. This >sounds like a lot of work to get to that point. If you are >using one lab that is printing digitally (and of course they almost all >are) they could provide you with a profile for their setup. >Assuming you had a calibrated monitor and colour management in place, you >could install their profile to use for soft proofing. Then >you should see on your calibrated screen what their output should look >like (within the limitations of the different devices). For >example I have a lab offering Fuji output from a prepared digital file >which is extremely cheap. They have set up info available. >They suggest conversion to sRGB (closest to the gamut of their machines) >and they provide a profile. If you found that with this set >up, there was a further adjustment, it ought to be consistent and you >could routinely apply that correction. Really though, this >methods should get you very close. >Drop me a line if I'm not making sense. >Cheers >Hoppy > >-----Original Message----- >From: lug-bounces+hoppyman=bigpond.net.au@leica-users.org >[mailto:lug-bounces+hoppyman=bigpond.net.au@leica-users.org] On Behalf Of >telyt@earthlink.net >Sent: Wednesday, 15 November 2006 09:49 >To: lug@leica-users.org >Subject: eyeball calibration (was: RE: PS Re: [Leica] DMR DNG profile hell >!) > >G Hopkinson <hoppyman@bigpond.net.au> wrote: > > > What were the problems for you, Doug and Brian, that > > caused you to abandon the Spyders? > >After calibrating the monitor with the Spyder, prints from a known >calibrated printer (the LightJet used by West Coast Imaging, which I >believe was Calypso's LightJet) were much too dark and contrasty. > >My procedure now is to do a rough calibration using only Adobe Gamma, >adjust the file in Photoshop the way I want it, then send the file to a lab >with a calibrated printer. Once I get the print back I open the file in >Photoshop, open Adobe Gamma at the same time, then adjust the monitor's >calibration (with Adobe Gamma) to make the PS image of the file look like >the print. Assuming the initial calibration isn't quite right, I can then >tweak the photo the way I want it with Photoshop. > >Doug Herr >Birdman of Sacramento >http://www.wildlightphoto.com > > >-------------------------------------------------------------------- >mail2web - Check your email from the web at >http://mail2web.com/ . > > > > >_______________________________________________ >Leica Users Group. >See http://leica-users.org/mailman/listinfo/lug for more information > > > >_______________________________________________ >Leica Users Group. >See http://leica-users.org/mailman/listinfo/lug for more information // richard (This email is for mailing lists. To reach me directly, please use richard at imagecraft.com)