Archived posting to the Leica Users Group, 2005/06/20

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: [Leica] older 35 cron soft in corners?
From: feli2 at earthlink.net (feli)
Date: Mon Jun 20 17:46:55 2005
References: <BAY107-DAV1303FB47D16099584C2D74EDF60@phx.gbl> <6.2.1.2.2.20050620105428.026ba6a0@pop.med.cornell.edu> <46AFA898-C149-46D2-BEE9-E54E46F0CF69@earthlink.net> <9b678e050620171346b811a4@mail.gmail.com>

I just had mine cleaned and adjusted by Leica, New Jersey (circa  
$80). I believe I am seeing
a little more snap wide open and they tightened up the focus and  
aperture movements considerably.
Mine was starting to feel a little rough around the edges. I believe  
the lubricants had dried up and dirt
had accumulated on the threads.

feli

On Jun 20, 2005, at 5:13 PM, Don Dory wrote:

> I also have a gen IV 35 Summicron.  I think that distortion is pretty
> small, however, vignetting to 2.8 is something close to two stops and
> the sharpness drops off pretty quickly in the corners until F4.
>
> Also, the lens is susceptible to poor results if the front group
> unscrews somewhat.  After twenty years the laquer? used to set the
> threads has come loose on many units and this movement can cause
> performance to suffer.
>
> Don

________________________________________________________
feli2@earthlink.net                 2 + 2 = 4                
www.elanphotos.com


no archive


In reply to: Message from leica_korenman at hotmail.com (eric) ([Leica] older 35 cron soft in corners?)
Message from chs2018 at med.cornell.edu (Chris Saganich) ([Leica] older 35 cron soft in corners?)
Message from feli2 at earthlink.net (feli) ([Leica] older 35 cron soft in corners?)
Message from don.dory at gmail.com (Don Dory) ([Leica] older 35 cron soft in corners?)