Archived posting to the Leica Users Group, 2003/10/24
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]there are probably a lot of different, similar designs. Did you have the original Magnum photo rewind made of brass? they are collectibles now. these rewinds are of new manufacture, one side is thinner than the other to go between the knob and top plate housing. Stephen Jerry Lehrer wrote: > Dennis and Steven > > I bought one of those cranks ages ago from Hansen in NY (for $20) > but it required a large amount of filing to thin out the band because of > limited clearance 'tween the knob and the RF housing on my M2. > > Jerry > > Dennis Painter wrote: > > > Hi Stephen, > > > > You can replace the metal tip setscrew with a nylon tip setscrew. > > > > You might start here: > > http://www.mcmaster.com/cgi/find.cgi?searchstring=90291A106 > > > > This may be close: Part Number 90291A106 > > it's a 4-40, 1/4", 18-8 stainless with nylon tip and hex drive. > > > > Lots of lengths and threads available there. > > > > Dennis > > > > Stephen Gandy wrote: > > > > > please visit http://www.cameraquest.com/LMRewindCQ.htm > > > > > > Thanks, > > > > > > Stephen > > > > > > -- > > > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html > > > > -- > > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html > > -- > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html