Archived posting to the Leica Users Group, 2003/02/24

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] ot TMAX100 scratching problems anyone?
From: Slobodan Dimitrov <sld@earthlink.net>
Date: Mon, 24 Feb 2003 07:04:37 -0800
References: <9A205CEA32FED411B6670002A513ABCE195E12E6@exlon01.lehman.com>

I guess this is where one starts with the simplest question. Did anyone
use hardener in the fix, and was it the proper amount?
Slobodan Dimitrov

"Beddoe, Neil" wrote:
> 
> I thought this was only me.  I did two rolls yesterday and they both had the
> same thing. The scratches are about 2-5 inches long at various places on the
> film. I shot a roll of FP4 between the two rolls of TMax and no scratches.
> 
> Neil
> 
> -----Original Message-----
> From: Dan States [mailto:dstate1@hotmail.com]
> Sent: 23 February 2003 18:20
> To: leica-users@mejac.palo-alto.ca.us
> Subject: [Leica] ot TMAX100 scratching problems anyone?
> 
> I have been using Tmax100 for years with good results.  However, in the last
> 
> 6 months or so I have gone through a rash of scratched film issues involving
> 
> multiple cameras.  At first  I thought my bulk loader had gone bad or had a
> batch of bad cans, so I changed to preloaded 24 exposure rolls.  The problem
> 
> continues.
> 
> The scratches are random in their location across the back of the film and
> do not generally run the full length of the roll.  As an experiment I tried
> pulling a roll out of the can, rewinding it by hand and then pulling it out
> again.  To my suprise there were light scratches on the film back without
> even being loaded in the camera!
> 
> I am also using Delta 100 and many other color films with no problems, and
> since it is not isolated to a particular camera I am thinking the film
> backing has been changed in some way.
> 
> I also notice that Kodak has started using masking tape to anchor the film
> to the spool, instead of the black rubber tape they used in the past.
> Either actually sucks because they both can cause a static spark if pulled
> off to fast, but the new tape seems to tear into strips easily, making for
> problems when loading.  (I COULD use scissors, but have had accidents when
> using them in the dark...)
> 
> Has anyone else seen similar issues with TMAX100?
> 
> Best wishes
> Dan States
> Grand Forks ND
> 
> _________________________________________________________________
> The new MSN 8: advanced junk mail protection and 2 months FREE*
> http://join.msn.com/?page=features/junkmail
> 
> --
> To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html
> 
> ------------------------------------------------------------------------------
> This message is intended only for the personal and confidential use of the designated recipient(s) named above.  If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited.  This communication is for information purposes only and should not be regarded as an offer to sell or as a solicitation of an offer to buy any financial product, an official confirmation of any transaction, or as an official statement of Lehman Brothers.  Email transmission cannot be guaranteed to be secure or error-free.  Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such.  All information is subject to change without notice.
> 
> --
> To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html
- --
To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html

In reply to: Message from "Beddoe, Neil" <nbeddoe@lehman.com> (RE: [Leica] ot TMAX100 scratching problems anyone?)