Archived posting to the Leica Users Group, 2002/05/15

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] M flash technique
From: "Christopher Williams" <LeicaChris@worldnet.att.net>
Date: Wed, 15 May 2002 21:11:28 -0500
References: <F8yuLmsZhNfv57kVwyr0000afc8@hotmail.com>

That's what I get for listening to a N*kon rep.

Chris Williams
New Orleans

- ----- Original Message -----
From: "olivier nguyen" <oliviertnguyen@hotmail.com>
To: <leica-users@mejac.palo-alto.ca.us>
Sent: Wednesday, May 15, 2002 8:35 AM
Subject: Re: [Leica] M flash technique


> Hi everyone and Chris,
>
> I open the SC17 cord up just right after I read your message last night
> about 1:30 A.M.  there is no way to reverse the position of the cord so it
> won't stick to the front.
>
> 1) first I intended to bring the wire to the opposite side but there is a
> problem.  the problem is that if i bring the wire to the backside, i have
to
> cut a hole so the wire can comeout of the the connector.  if i cut a hole,
i
> will also cut away the tab that hold two parts of connector together.  so
> ..NO GO.
>
> 2) second, I then try to see that I can reverse the pins so it can be
> opposite with the cord while it in camera position.  this is also no go.
> since all the pins have hole to hold and even if i drill new hole to the
> connector, it won't work due to the fact that there are many hole already
> pre-grill in there that won't give much tolerance between each hole.
>
> bottom line,  no way to reverse the SC17 cord with a proper secure way.
>
> I am thinking of drill a hole on top of the connector so the cord instead
of
> come out in front it is now come out on top.  I am not sure about this way
> yet.  would it worth to do this and would the cord still interfere with
the
> camera front any more after modification?  I will check again and see it
> worth a try.
>
>
>
>
> >From: "Olivier T. Nguyen" <onguyen@optonline.net>
> >Reply-To: leica-users@mejac.palo-alto.ca.us
> >To: leica-users@mejac.palo-alto.ca.us
> >Subject: Re: [Leica] M flash technique
> >Date: Wed, 15 May 2002 01:34:29 -0400
> >
> >Chris,
> >are you serious?  please confirm this before i open it up. :)
> >Olivier
> >----- Original Message -----
> >From: "Christopher Williams" <LeicaChris@worldnet.att.net>
> >To: <leica-users@mejac.palo-alto.ca.us>
> >Sent: Tuesday, May 14, 2002 10:39 PM
> >Subject: Re: [Leica] M flash technique
> >
> >
> > > I'm told by a Nikon rep that the SC17 could be taken apart and
reversed
> >to
> > > have the cord in the back of the hotshoe instead of sticking out the
> >front.
> > > She told me the SC17 cord is basically telephone wire and can be cut
and
> > > replaced. Anyone wanna try this?
> > >
> > > Chris Williams
> > > New Orleans


- --
To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html

In reply to: Message from "olivier nguyen" <oliviertnguyen@hotmail.com> (Re: [Leica] M flash technique)