Archived posting to the Leica Users Group, 2002/04/15
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Thanks Rei What minimum size would recommend? I dont have room 2'x 8'. Maybe 2'x 4'will make it. Is that too small? Mike - -----Original Message----- From: Rei Shinozuka [mailto:shino@panix.com] Sent: Monday, April 15, 2002 9:53 AM To: leica-users@mejac.palo-alto.ca.us Subject: Re: [Leica] Sink Question i built my 2-foot x 8-foot sink out of marine (green) plywood over a frame of 2x4's with 4x4 legs. i grooved the plywood to fit sides and resorcinol glue and screws to put the peices together. on top of this i used an epoxy paint used for bathtubs. a large splash on the back mounts faucets, temp mixer, etc. it seems to work well... mind you i don't keep an inch of standing water permanently in the sink, it mostly for holding trays and washing film. the only real downside compared with a pre-made sink is that there's no sloping drain, so you need to push water down it with a squeege. - -rei > From: "Ginex, Mike" <mginex@panynj.gov> > > Hello LUG'ers, > I'm building a darkroom (don't laugh). I'm ready to install a sink and > someone recommended that I build one to fit the space I have for it. > Anybody got any hints as to materials, configuration, minimums, Etc. > Always grateful, > > Mike Ginex > -- > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html > - -- Rei Shinozuka shino@panix.com - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html