Archived posting to the Leica Users Group, 2002/03/25

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] Re: Darkroom Question
From: "Christopher Williams" <LeicaChris@worldnet.att.net>
Date: Mon, 25 Mar 2002 23:12:42 -0600
References: <5.1.0.14.2.20020325091116.0e89d098@pop.alink.net> <014601c1d482$f91933e0$02000003@dnai.com>

Stop bath for prints is helpful to your fixer. Stop bath with FB paper is a
must.Unless there  is another alternative.

Chris Williams
New Orleans

- ----- Original Message -----
From: "Roland Smith" <roland@dnai.com>
To: <leica-users@mejac.palo-alto.ca.us>
Sent: Monday, March 25, 2002 10:59 PM
Subject: Re: [Leica] Re: Darkroom Question


> I wondered if others used water instead of stop bath for film.   I have
been
> doing that since the middle 1950s.
>
> I do use stop bath for prints.   Is this really necessary?
>
> Roland Smith
> Oakland, California
> ----- Original Message -----
> From: "Jim Brick" <jim@brick.org>
> To: <leica-users@mejac.palo-alto.ca.us>
> Sent: Monday, March 25, 2002 9:24 AM
> Subject: [Leica] Re: Darkroom Question
>
>
> > At 09:04 AM 3/25/2002 -0600, Bill Satterfield wrote:
> > >Was in the darkroom over the weekend developing film.  I use  a tank.
On
> > >one batch, I used a  ounce of short stop to 15 1/2 ounces of  water
> rather
> > >than a 1/2 ounce. Film looks OK.  What harm did I do and what can I
> > >expect?. A mental error caused by waiting to long to develop rolls of
> > >film. Perhaps, I ought to develop more frequently. Thanks
> >
> >
> > Actually, no harm. I have never used a stop bath in film processing in
my
> > 50 years of darkroom work. It is unnecessary. But too much stop won't
> > bother anything anyway unless you are using a developer containing
> > carbonate. Which there are none of nowadays.
> >
> > Hydroxide will evolve CO2 but Rodinal is about the only normal contrast
> > developer containing it. But I have never known anyone to have stop bath
> > problems, regardless of concentration.
> >
> > When I started darkroom work in the 50's, there were carbonate
containing
> > developers being used and stop bath had the possibility of causing "pin
> > holes" which is gas forming within the emulsion, rapidly being released,
> > causing an eruption thus a pin hole. Because of this, I was taught
(Brooks
> > Institute of Photography) to simply use water as a rinse between the
> > developer and fix with film. It has served me well for all of these
years.
> >
> > Jim
> >
> > --
> > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html
> >
>
>
> --
> To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html
>

- --
To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html

In reply to: Message from Jim Brick <jim@brick.org> ([Leica] Re: Darkroom Question)
Message from "Roland Smith" <roland@dnai.com> (Re: [Leica] Re: Darkroom Question)