Archived posting to the Leica Users Group, 2002/03/11
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Bring it on by, and I'll take care of it for you. Austin > -----Original Message----- > From: owner-leica-users@mejac.palo-alto.ca.us > [mailto:owner-leica-users@mejac.palo-alto.ca.us]On Behalf Of B. D. Colen > Sent: Monday, March 11, 2002 2:40 PM > To: leica-users@mejac.palo-alto.ca.us > Subject: RE: [Leica] re: Rapid Winders -TOTALLY ON TOPIC > > > My problem is just the opposite - the screw holding the basket to > one of my > baseplates is so Godawful tight that I can't get it out in order > to transfer > the basket to a rapid winder.;-) > > B. D. > > -----Original Message----- > From: owner-leica-users@mejac.palo-alto.ca.us > [mailto:owner-leica-users@mejac.palo-alto.ca.us]On Behalf Of Andrew > Nemeth > Sent: Monday, March 11, 2002 1:58 PM > To: leica-users@mejac.palo-alto.ca.us > Subject: [Leica] re: Rapid Winders -TOTALLY ON TOPIC > > > "Austin Franklin" <darkroom@ix.netcom.com> wrote: > > > One suggestion I would make is to strongly point > > out that one wants to use LocTite (I can give you > > the exact number if you like) on the screw that > > holds the little plastic film basket... > > Thanks for this tip. However I've been using the RW > a lot since last Oct and the screw you mention hasn't > loosened a bit in all that time (I just checked). > > Also, Leica don't use LocTite to hold the screw in > place on the baseplate, so I guess it's just a case > of screwing the thing down and forgetting about it! > > Regds, - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html