Archived posting to the Leica Users Group, 2002/02/24
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Why not use the old Buetler formula rather than the Rodinal grain grower? - ----- Original Message ----- From: "Jim Brick" <jim@brick.org> To: <leica-users@mejac.palo-alto.ca.us>; "leica" <leica-users@mejac.palo-alto.ca.us> Sent: Sunday, February 24, 2002 7:29 PM Subject: [Leica] Re: OT: Developing reels: a Saga > At 04:31 PM 2/24/2002 -0800, Pete Su wrote: > > >Some background: I'm not the most dextrous person on the planet. I just can't > >abide any scheme for loading that involves trimming the negatives with high > >precision. Plastic reels *can* work well with 120 film *if* you can trim them > >so the corners don't get caught on the reel and jam things. But I just > >can't do > >this. > > > Pete, > > I use my JOBO system for all sizes of film. I do not cut the corners of my > 120 & 220 film. I do cut off the glue on 220 but on 120 I just load it from > the non glue end. > > On 220, in the dark, it is impossible to cut the glue/tape off at a right > angle cut. Mine always go in one odd direction or the other. But that makes > no difference either. Once the film is in the reel a few inches, rotating > the reel sides while helping the film with your thumbs, the film goes right > in. I load two 120 films or one 220 roll on one reel. I don't do anything > special. Use a film end that has no glue/tape residue and it goes right in. > > I've done this for many many hundreds, perhaps thousands of rolls with only > the occasional hiccup. But for sheer ease, stainless steel reels are the > best. Which is what I use for slow film in Rodinal. 35mm or 120. > > Maybe it just takes lots of practice. But if I can do it, anybody can do it... > > :) > > Jim > > -- > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html