Archived posting to the Leica Users Group, 2001/12/19

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] SLOPPY BORDERS - HELP!!!!
From: S Dimitrov <sld@earthlink.net>
Date: Wed, 19 Dec 2001 17:29:16 -0800
References: <200112180950.BAA23716@mejac.palo-alto.ca.us> <p05010400b8452f9326a5@[213.240.1.60]> <004101c18849$7b38e180$53cccb3f@default>

I would bevel at least the top half. I found that by having both halfs
cut the same I was getting ghosting from the carrier unto the white
area. It didn't look like it should be there and it somewhat detracted
from the composition.
 Slobodan Dimitrov


Arie wrote:
> 
> Milos,
> When you file out your negative carrier. do not bevel your file cuts (no
> 45%).  Also when you hog it out keep the two halves of the carrier together,
> vary your angle of cuts.  Rough file the lines, THEN deburr the inner edge
> of the hole in the carrier (fine finish ).  This will give you the coarse
> edge and the second outer line parallel line.  If you have any questions
> contact me off list
> Arie Knoops
> ariek@pacbell.net
> 
> ----- Original Message -----
> From: <imagecom@EUnet.yu>
> To: <leica-users@mejac.palo-alto.ca.us>
> Sent: Tuesday, December 18, 2001 9:40 AM
> Subject: [Leica] SLOPPY BORDERS - HELP!!!!
> 
> > Hello all,
> > Can anyone tell me how to make negative masks that will give me
> > sloppy borders, you know those
> > black borders that look uneven around the picture.
> >
> > Thank you
> >
> > Milos
> >
> >
> > --
> > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html
> >
> 
> --
> To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html
- --
To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html

In reply to: Message from imagecom@EUnet.yu ([Leica] SLOPPY BORDERS - HELP!!!!)
Message from Arie <ariek@pacbell.net> (Re: [Leica] SLOPPY BORDERS - HELP!!!!)