Archived posting to the Leica Users Group, 2001/10/04

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] Leica M lens cam modification
From: V8PWR@aol.com
Date: Thu, 4 Oct 2001 14:42:50 EDT

Dans un courrier daté du 04/10/01 15:57:35 Paris, Madrid (heure d'été), 
dennis@hale-pohaku.com a écrit :

> Dear Luggers,
>  >
>  > this is regarding leica M lens cam.
>  > Instead of grinding the lens cam, [for example on M2, so that the 50mm 
> lens
>  > will show 35mm frame (this is just an example)], is there any way to do 
> the
>  > opposite? somehow adding the cam a little bit (around 0.5mm)?
>  >
>  > I have one particular lens that not showing exactly 50mm frame, just 
> shifted
>  > a bit towards 35mm.  I don't want to adjust the camera frame showing
>  > adjustement since all my other lenses are showing the frames properly.
>  >
>  > Will some epoxy/glue be acceptable?
>  >
>  > thanks in advance
>  > --
>  > hans
>  
Hans . Try sticking a small piece of aluminum tape over it .
But franckly , in that case I'd prefer to have the camera adjusted .
Your cmaera is probably " on the edge " concerning frames
selection .


Jo Goodtimes , France 
- --
To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html