Archived posting to the Leica Users Group, 2001/05/20
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Besides the original Leicaflex, only the R6, R6.2, & R7 have a cable release socket MLU. The R8 has MLU but is different. Jim At 01:50 PM 5/20/01 -0400, you wrote: >------Original Message------ >From: "Aram Langhans" <alanghans@komoto.naches.wednet.edu> >To: leica-users@mejac.palo-alto.ca.us >Sent: May 20, 2001 2:01:44 PM GMT >Subject: Re: [Leica] Leica Users digest V20 #23 > >>>> >A while back while searching for information on Leica I ran across a >reference to this very feature >(http://www.nemeng.com/leica/index.shtml#009c) , but it stated it was on the >R4-R7 cameras. I have two R4's and I cannot seem to locate any such socket >on them. Was this reference in error? Is this feature on the R4? I see >one little hole under the lens mount flange that has a little brass colored >thing it it. If I depress that brass colored thing, all that happens is >that the shutter will not fire. I assume that it has something to do with a >motor winder/drive, which I do not have. I Emailed the author and got no >reply. ><<< > >Aram, > >You're right, the R4 does not have the mirror pre-fire feature. I'm not >sure about the R5 and R-E but it is on the R6 R6.2 and R7. > >The little brass-colored thing is, as you suspect, one of the motor/winder >fittings. > >Doug Herr >Birdman of Sacramento >http://www.wildlightphoto.com > > >