Archived posting to the Leica Users Group, 1999/09/11
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]BD- NC and it's 6:13, and I'm getting ready to go get breakfast! I'll check back later to see if you still have any hair left! Dan - ----- Original Message ----- From: B. D. Colen <bdcolen@earthlink.net> To: <leica-users@mejac.palo-alto.ca.us> Sent: Saturday, September 11, 1999 1:56 AM Subject: RE: [Leica] HELP!!! - Epson 750 > By the way, Dan, you are an absolute and total prince...and THIS is the > ultimate example of why the LUG is a real wonder...It's 5:54 a.m. here..I > seem to be struggling with insomnia, so I came up to my office figuring that > I might as well resume my computer wars, and fired off the Help message to > the LUG figuring that maybe in three or four hours I'd get a reply...but > where ever you are it's allegedly 9:48 a.m. and you replied...Wait! The sun > rises in the east...Where the hell are you and what time is it? > > > > -----Original Message----- > From: owner-leica-users@mejac.palo-alto.ca.us > [mailto:owner-leica-users@mejac.palo-alto.ca.us]On Behalf Of Dan Post > Sent: Saturday, September 11, 1999 9:48 AM > To: leica-users@mejac.palo-alto.ca.us > Subject: Re: [Leica] HELP!!! - Epson 750 > > > BD- > Check the form the data is being sent- > In the START box, click on SETTINGS/Printers/ Epson 750 > When you get the box open for the printer, click on PRINTER/PROPERTIES > When that opens, click on DETAILS, then find where it says "Spool Settings", > click there and for Spool Data Format- it should be set to RAW. > See if that helps. > Dan > ----- Original Message ----- > From: B. D. Colen <bdcolen@earthlink.net> > To: Leica-Users@Mejac. Palo-Alto. Ca. Us (E-mail) > <leica-users@mejac.palo-alto.ca.us> > Sent: Saturday, September 11, 1999 1:26 AM > Subject: [Leica] HELP!!! - Epson 750 > > > > Help!! Finally got my Epson 750 to replace the 700. But... > > > > The damn thing won't print from either PhotoShop or Correl > Photo-Draw8...It > > prints immediately from Word and from the Word Note Pad...but when I try > to > > print out of either of those high end graphics packages, it goes smoothly > > through all the prep routines, spools my photo, tbe monitor appears, and > > then disappears within about 1.5 seconds and the "printing process" is > > over... > > > > I spent a good hour on the phone with two "support" folks from Epson - the > > second of whom was an arrogant p---k....WHen all else failed he blamed the > > problem on the fact that I am running the upgrade version of Windows 98, > > rather than the virgin version, and said I should either wipe my hard disk > > clean and install a new version of windows 98, or not use the > printer...That > > sounds nuts... > > > > Any thoughts.....?? > > > > > > > >