Archived posting to the Leica Users Group, 2007/04/30
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]got the answer: from http://www.leica-camera-user.com/digital-forum/14467-m8-metz-54mz-4i-sca-3502m4.html >Hi Bill, if I remember right GnC is not mentioned in the manual for the flash but is mentioned in the small booklet/manual for SCA 3502 (you can download the booklet from Bogen USA if you have misplaced yours). On a 54 MZ 4 or 54 MZ-4i you first set the SCA 3502 in GnC mode (by flipping a small switch on SCA 3502) and then put the flash in M mode and turn the small wheel on the flash until GnC shows up on the LCD screen. I have not used any other Metz flash so I am not sure if the flash you have will work in this way or not. On 4/30/07, Jerry Justianto <jsjgroups@gmail.com> wrote: > Just check flash photography and found out > > My Metz MZ4 & sca 3502 m4 does not work with M8 > > The camera keep sending sporadis ISO setting, zoom and aperature. > > when flash set up to TTL, the flash didnt flash > when setup to A, the flash works but the setting make the pictures > over expose due to the aperature is set to f/ 45 > > anyone have the same problem? > > JSJ >