Archived posting to the Leica Users Group, 2006/09/14
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Hi Don, yes I understand that film ought to be un-scratchable in dip n' dunk. Nevertheless somewhere during its handling that particular roll became marked. That lab is a very well established one but I guess anywhere can have a mishap. But of course it does put you off. That camera could have been one of a cast of quite a few! I've not seen scratching since, though. For me though, the amateur E6 lab I now use is cheaper, consistent quality and even has proper chemical colour and bw options for neg stuff. Plus it's attached to the largest camera shop locally. Cheers Hoppy -----Original Message----- From: lug-bounces+hoppyman=bigpond.net.au@leica-users.org [mailto:lug-bounces+hoppyman=bigpond.net.au@leica-users.org] On Behalf Of Don Dory Sent: Friday, 15 September 2006 10:42 To: Leica Users Group Subject: Re: [Leica] was Video of M8 - now dip n dunk kink Hoppy, If the lab you used was truly dip and dunk and you got scratches there are only two options. First, they are incredibly slovenly and you should never darken their door again. The second option is that your camera has some crud in the film path. Camera crud is easily checked by running a roll in and out and then looking at it; no need to develop the roll. No scratches, not your problem see number 1. This is one of those things that I take very seriously. If you are a pro lab then the film is pristine. If the film is not pristine then they are not a pro lab. E-6 here in Atlanta had a power failure during the processing of a major order(more than an hundred rolls) in which 5-6 rolls were ruined. Although it was not their fault, they comped the whole order as they take real pride in the quality of their output. Don don.dory@gmail.com