Archived posting to the Leica Users Group, 2003/12/16
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Thanks - good advise - ----- Original Message ----- From: "Daniel Ridings" <daniel.ridings@muspro.uio.no> To: <leica-users@mejac.palo-alto.ca.us> Sent: Tuesday, December 16, 2003 7:03 AM Subject: Re: [Leica] OT: Lunasix 3 issue > > Right now I'm fiddling with it and on the low range the needle goes up > > beyond 12 in this particular illumination. But, taking the exact same > > reading in the high range, the needle drops below 12. Thus no consensus. > > No accurate reading is possible. > > That used to happen with my LunaPro 3 (I say used to, because I went over > to a Digisix and a Digiflash a few months ago). I usually just settled on > setting it at 12. > > I know the lighting you're talking about EI 400, 1/60th @ f2.8 ... it's > ALWAYS like that. I quit using a meter for that light. It's boring always > getting the same reading. > > So if that'st the range giving you problems, take the Gossen. It's > trustworthy away from that borderline and now you know what the borderline > is, so you can just go with 1/60th @ 2.8. > > Daniel > -- > To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html